+39 0331 1693557 inti@intisrl.it

INTIMAC

OUR EXPERIENCE AT YOUR SERVICE

Production and packaging machinery for the pharmaceutical, chemical and cosmetic industry

Used machines

We carry out the complete revamping of the machines

Download of all our available used machinery

Used machines [263]

FETTE Tablet Presses FETTE P3100
Tablet Presses FETTE P3100
IT416
FETTE
P3100
1992

Number of punch stations 55
Output tablets 594,000/h
Max. tablet diameter 13 mm
Max. filling depth 18 mm
Max. tablet thickness 8,5 mm
Max. compression force 100 kN
Max. initial compression force 20 kN
Dieplate speed 15-90 rpm .
Dimensions of the machine : 1490 x 1230 x 2100
Weight approx. 3750 Kg

more info
BOSCH Aseptic Filling and Closing Machines BOSCH FLP3060 + VRK 4010
Aseptic Filling and Closing Machines BOSCH FLP3060 + VRK 4010
IT417
BOSCH
FLP3060 + VRK 4010
1999

Bottle filling machine with spray (nasal spray)
Current bottle 10 ml, 400V / 50Hz
Production 12. 000 bottles / h
6 filling stations, with self-priming rotary piston pumps made of stainless steel
Dosing accuracy +/- 0.5%
Insertion of spray pump, one vibrating loader

C-BOSCH capping machine for pressure cap
Type VRK 4010
Max. production 12,000 bottles / h

more info
FETTE Tablet Press FETTE P3100 EU D
Tablet Press FETTE P3100 EU D
IT418
FETTE
P3100 EU D
n/a

Tablet press P3100 EU D with 37 stations, recently overhauled.
Number of punch holding stations: 37
Tablet output max. units/h: 341.880
Tablet dia. Max mm 25
Filling depth max mm 22
Tablet thickness max. mm 11
Compression force max. kN 100
Initial compr. force max kN 20
Pitch circle dia. Mm 508
Dieplate speed rpm 25-77
Die diameter mm 38.1
Die height mm 23.8
Punch shank dia. mm 25.35
Punch length mm 133.6
Upper punch penetration mm 2-8
Height of the machine without filling hopper mm 1965
Height of the machine with filling hopper mm 2105
Projected floor area mm 1490x1230
Weight approx.. 3400 kg

more info
MARCHESINI GROUP Vial filling machine MARCHESINI GROUP ML652
Vial filling machine MARCHESINI GROUP ML652
RS419
MARCHESINI GROUP
ML652
2011

Format for vials Diam 21.5 x H 50 and 60 mm (10-14 ml)
Aluminium cap diam 20 mm.
8 filling pumps
Ejection of non-conforming products under laminar flow, continuously controlled by a hot wire anemometer and a particle counter connected to the EUROTHERM environmental monitoring system
Turntable
Dimensions (in m): Excluding hoppers and electrical cabinet: L 4.40 x W 1.60 x H 1.90 m (1500 Kg)
Max speed : Up to 400 bottles/minute
Nominal output : 250 / min. C - NERI TM2 loading machine from 2011
Dimensions (in m): Excluding infeed conveyor: L 2.38 x W 1.25 x H 1.42 m (excluding console)

more info
OPTIMA Complete line made of Filling machine OPTIMA SV125  + Labelling machine OPTIMA EK321 + Blister machine MEDISEAL CP3
Complete line made of Filling machine OPTIMA SV125 + Labelling machine OPTIMA EK321 + Blister machine MEDISEAL CP3
RS420
OPTIMA
OPTIMA SV125 + OPTIMA EK321 + MEDISEAL CP3
2005

Set of sizes PFS 0.5ml, 1ml long, 5ml
Workflow: The tubs are already fed on the infeed roller conveyor without overloading. There are no devices on the machine to open the overbag or to dispose of it. The syringe at the end of the roller conveyor is lifted manually onto the automatic through-feed conveyor. Then the Tyvek closure is removed manually. The tank is transported further; the nest is lifted and placed in the x-y table. The syringes are filled and sealed with caps. During the filling and/or sealing process, the formation of N2 gas is possible. The filled tanks are transferred from the automatic conveyor belt to the discharge roller conveyor. Capacity: Max. 9,500 pieces.
Technical data: Power supply: 277/480 Volt and 60Hz Current: 5 A; Fuse protection: 3 x 25°. Filling dimensions: The filling consists of 3 parts that are independent: Part 1: Feeding roller conveyor with table for manual removal of Tyvek . Dimensions: 110 cm length, 80.5 cm width, 112 cm table top height. Removable feet. Removable feed track 150 cm long. Part 2: The basic machine is 190 cm long and 79 cm wide. The through conveyor belt is 137+186 cm long. Exit side projection 100 cm. The belt is completely off the table. The drive for this is at the exit end. Plug-in power supply. Part 3: The roller conveyor is 184 cm long. The dimensions are: Single cabinet 80 cm wide. Double cabinet 120 cm wide; 60 cm deep; 210 cm high.
2. Labelling machine PFS EK321
Year of construction 2005
Machine for setting the plunger on the individual syringes and for labelling them .Workflow: The plunger is screwed into the separate syringes in the star wheel, followed by labelling and transfer to the outlet of the suitable pieces. Syringes that do not match are pushed out into the reject outlet. Capacity: max. 3,600 pieces. Technical data: Separate control cabinet for the machine. Integrated transformer. Power supply: 480 Volt and 60Hz Current: 4 A. Fuse protection: 3x20A Compressed air supply. The machine is equipped with 1 emergency stop on the panel and 1 on the control panel. Machine for inserting single syringes into a " BD Preventis TM " safety device and labelling it.
The safety device "BD Preventis TM" belongs to the group "semi-automatic activation / active device" and is suitable for glass PFS in sizes 0.5 ml and 1 ml with fixed needle.
Workflow: On one side the separate syringe flows into the machine, on the other side the Saftey Device. This is already labelled with the PFS before mounting. After mounting the PFS - Saftey Device, the correct mounting is checked with a camera. The label is read in advance (by scanner) and printed out with variable data (hot foil printer), the printing is checked with another camera (integrated in the associated SYSTECH terminal). The presence of the label is checked with a luminescence sensor. Performance: max. 6,000 pieces. PFS / h. Technical data: Control cabinet with a transformer mounted inside.Power supply: 480 Volt and 60Hz Current: 5 A. Fuse protection: 3x20A. Pre-rater label: For storage of 2 pieces. Label rolls (do not stick automatically). Power supply and earthing through label dispenser. 70 cm deep with control cabinet 85 cm long.187 cm high .40 cm roll diameter; core rolls of approx. 7 cm are not clear
Blister machine
Company MEDISEAL Model CP3
Year of manufacture 2008
Machine that sucks a blister from the roll of film, loads it with syringes, seals it with the covering film and perforates it. The cover sheet can be printed inline in the machine; control of the print data is done by a camera system. Workflow and functionality: The bottom foil is peeled off, preheated and thermoformed to the blister. Blisters with foil bottom seams are recognised as such and rejected. The blister is placed on the machine, cooled and then loaded with product. Loading is fully automatic via a DIVIDELLA syringe feeder (Pick & Place system; format set only up to 25 mm syringe body diameter). It is currently loaded manually in an inclined rail. Correct and complete loading is monitored with sensors / cameras. The top sheet is removed from the roll, printed in-line with an inkjet printer (type WOLKE m600 advanced) controlled with 2 pieces. (integrated in the SYSTECH system, which is assigned to this machine; for this purpose an IPC type VIK2 Master-CX is installed in the control cabinet at the rear) and sealed on the blister. Blister packs with upper foil seams are detected as such and rejected. Individual blister cavities can be punched if necessary. The blister is punched and transferred to the unloading conveyor. Non-conforming blisters are discharged downwards through a flap on the discharge conveyor. Output: According to manual max. 55 cycles/min. Technical data: Power supply: 230 / 400 Volt, 3 Ph with "N" and 50Hz Connected load: 25 kVA. Rated current: 37A, 200 mm max. film width, 140 mm max. draw length, 600 mm max. lower film roll diameter 300 mm max. upper film roll diameter
Vacuum pump installed in the machine . Cooling unit required . Central shaft drive. In addition to the machine panel there is a screen with keyboard for the SYSTECH system. Compressed air: 6 bar / approx. 440 NL/min.

more info
OPTIMA Aseptic Filling and Closing Machines OPTIMA SV125
Aseptic Filling and Closing Machines OPTIMA SV125
RS421
OPTIMA
SV125
2005

Set of sizes PFS 0.5ml, 1ml long, 5ml
Workflow: The tubs are already fed on the infeed roller conveyor without overloading. There are no devices on the machine to open the overbag or to dispose of it. The syringe at the end of the roller conveyor is lifted manually onto the automatic through-feed conveyor. Then the Tyvek closure is removed manually. The tank is transported further; the nest is lifted and placed in the x-y table. The syringes are filled and sealed with caps. During the filling and/or sealing process, the formation of N2 gas is possible. The filled tanks are transferred from the automatic conveyor belt to the discharge roller conveyor. Capacity: Max. 9,500 pieces.
Technical data: Power supply: 277/480 Volt and 60Hz Current: 5 A; Fuse protection: 3 x 25°. Filling dimensions: The filling consists of 3 parts that are independent: Part 1: Feeding roller conveyor with table for manual removal of Tyvek . Dimensions: 110 cm length, 80.5 cm width, 112 cm table top height. Removable feet. Removable feed track 150 cm long. Part 2: The basic machine is 190 cm long and 79 cm wide. The through conveyor belt is 137+186 cm long. Exit side projection 100 cm. The belt is completely off the table. The drive for this is at the exit end. Plug-in power supply. Part 3: The roller conveyor is 184 cm long. The dimensions are: Single cabinet 80 cm wide. Double cabinet 120 cm wide; 60 cm deep; 210 cm high.





more info
GDN Distillation Unit GDN PSME 200 3E
Distillation Unit GDN PSME 200 3E
RS422
GDN
PSME 200 3E
2011

Type PSME 200 3E - Electrical Multieffect Distiller
Year of construction: 2011
Material: Stainless steel
Internal finish: Mirror polished
External finish: Mirror polished
Connections: Welded
Dimensions:
Length 1400
Depth 1300
Height 3160
Bracket: Adjustable brackets
Voltage: 380 V AC ± 4% , 50 Hz - three phase
Feed water type : PW water
Feed water flow rate: 220 lt/hr @ 20°C / 1-3 bar * Cooling water consumption: 227 lt/hr @ 20°C / 1-3 bar
Cooling water consumption: 227 lt/hr @ 15°-85°C* * Cooling water consumption: 227 lt/hr @ 15°-85°C
WFI production: 200 lt/h by gravity @ 85°-90°C* * Cooling water consumption: 227 lt/hr @ 15°-85°C
Electricity consumption: 55 Kw/hr
Compressed air pressure: 6-8 bar

more info
Inova Inova SV 122 Syringe Filling Machine
Inova SV 122 Syringe Filling Machine
IT423
Inova
SV 122
2005

Inova SV 122 Syringe Filling Machine
Year: 2005
This semi-automatic implant is currently equipped with the BD-Hypak SCF system and parts in 0.5 ml syringe format, 1 ml - 5 ml for nested syringes.
Two syringes are filled during each filling cycle and the filled syringes are closed by rubber plugs.
The machine is offered complete with adjustable rotary valve pumps and works with two filling stations.
It is designed for variable speed operation and has a maximum capacity of 4,500 syringes per hour.
Technical data:
- Dosing range: 0,2 - 29 ml (with appropriate dosing pumps)
- Material specifications: 316 L, hard chrome silicone, Teflon
- Pre and post-gassing
Electrical installation:
575 V, 3 Ph, 60 Hz
Surface: 1400 x 952 x 1877 cm
Weight: 800 kg

more info

CONTACTS

INTIMAC s.r.l.

Via XXV Aprile, 8

21054 Fagnano Olona (VA)

Italia

Tel. +39 0331 1693557

email: inti@intisrl.it

TRADEMARKS