Giusti preparator 75 litres
Year of manufacture: 1996
Capacity: 75 litres
INNER BAR:
Max. PR: ATMOS
Min. PR: ATMOS
Test pression: water fill
Working pression: ATMOS
Design temperature: 150 °C
JACKET BAR:
Max. PR: 3.3
Min. PR: ATMOS
Test pression: 5.0
Working pression: 3.0
Design temperature: 150 °C
Centrifugal sifter Kemutec model K300:
Cantilevered shaft design.
Designed for throughtputs of 3 to 5 tons an hour dependent upon the product and sieve screen size.
Mirror polished machines are well suited to high hygiene applications in the pharmaceutical industry.
Benefits
- Clean, simple design
- High efficiency – time saved during inspection, cleaning and maintenance
- No tools required for stripping down and cleaning
- Easy access to oversize end door for opening in seconds
- Easily removable sifter screen for inspection and cleaning
- No leakage or contamination at the oversize end
- 360° in-situ rotation of sifting screen means inspection of the complete screen without removing from the machine.
Inkjet coding printer Linx 6200
Year: 2000
Model: 6200
Inkjet coding printer Linx 6200
Year: 1999
Model: 6200
Inkjet coding printer Linx 6200
Year: 1999
Model: 6200
Inkjet coding printer Linx 6200
Year: 2001
Model: 6200
Inkjet coding printer Linx 6200
Year: 2001
Model: 6200
Inkjet coding printer Linx 6800
Year: 2006
Model: 6800
Farmo Res Hypak Tub Re-Nester RN200
(2014)
Faster Horizontal LAF transfer trolleys are used for the storage and the transfer of products that are sensitive to contamination, between two classified areas, generally separated by autoclaves.
Self powered mobile LAF Trolley: by means of dry UPS battery - provides a laminar air flow of Class ISO 5 (NF, EN, ISO 14644-1) , maintaining a constant positive pressure within the transfer trolley, thereby eliminating the possibility of any cross contamination.
Stainless steel structure AISI 304L 4B (Scotch Brite finishing) press-bent metal sheets with radius of 3 mm for easy cleaning and roughness lower than 0,8 Ra.
Filtration stages consisting of G3 pre-filter with typical arrestance of 80 ≤ Am > 90 according to EN 779 fitted on stainless steel cell with quick release system (no screws needed to remove the panel).
Low pressure drop H14 HEPA/ULPA filter according to CEN EN 1822.
Ventilation provided by energy efficiency low power consumption EBM Papst motorblower.
Dry battery UPS recovery pack with theoretical battery duration of 100 minutes starting from full charge status. UPS unit is provided with charge indicator (UPS must be plugged for recharging anytime in order to keep the always close to full charge status battery).
Pivoting castors with brakes.
Side, top and internal shelves made in stainless steel.
Frontal hinged or removable stainless steel panel with closing handle.
Backlit main switch.
Transport of fine pharmaceutical powder.
-20 / TA / +60°C operating pressure 5.5 bar compressed air 516 Nl/min Transport capacity 200kg/h Apparent density: 0.5 -0.8 kg/dm3
Cooling chiller model BE/ESRH 5104
2 pieces
Technical data : Weight : 8,700 kg Refrigerant gas R134A Refrigerant charge : 40 + 3 x 35 kg Oil type : CPI SOLEST 120 Voltage : 400 / 3 / 50 / + PE FLI : 480 KW FLA : 816 A Maximum pressure : gas circuit : HP : 2,8 MPa LP 2,0 MPa Water circuit : 1,0 MPA
Sheet formats :
Max feed in width : 210 mm
Minimum feed in width : 148 mm
Max feed in length: 320 mm
Max in special version : 650 mm
Minimum feed in length 90 mm
Smallest fold 30 mm
Folding possibility :
Station I : 4 folding pockets for 1-4 parallel folds
Station II : 2 folding knives for 1-2 knife folds
Paper Weight
Recommended paper weight: 45-70 g/m²
Capacity
Leaflet length below 320 mm – up to 200/min
Leaflet length above 320 mm- up to 150/min
Drive
From the cartoning machine - via a chain
Noise pressure level : 80 dB (A) ( Without sound insulation )
Dimensions / weight
Length x width x height 0,963 x 0,998 x 0,619 m
FA21/4 – 2K Folding unit – approx. 200 kg
Paper specifications :
The following demands relating to paper quality and paper storage apply in the case of thin papers in order to allow fault- free operation :
Material : wood-free matt, glazed thin printing paper
Paper weight: 40-80 g/m²
Thickness ( Din 53105, part 1 ) – 55 um ( 52-58)
Format : as required, e.g 21x30 cm / four-sided angled guillotine cut / on four sides +/-0,5 mm
Fibre direction for paper
From 40-80 g/m² : 90° towards folding edge
Porosity ( Bendtsen ) : 60 ml/min ( 30-90)
Smoothness/sec. in accordance with BEKK : 60 ( 30/90)
Relative assimilation humidity 52 % ( 46/58 ), 20°
Ash : 15 % (13/17)
Brightness DIN 53145 , Part 2 : 75
Opacity : 75
Luminance ( ciba – geigy scales ) : 6
Double folds 150 means value both LR
Flexural STRENGTH IN 7 Mn mean value / accordance with 2-points: longitudinal – horizontal ( method DIN 53122 )
Storage: In piles, sealed air tight in film, with same format cover and base card ( 1 mm )
Static charging: in order to avoid static charging, the sealed paper piles must be stored in refrigerators and not removed until shortly before they are used .
Sheet formats : Max feed in width : 210 mm Minimum feed in width : 148 mm Max feed in length: 320 mm Max in special version : 650 mm Minimum feed in length 90 mm Smallest fold 30 mm Folding possibility : Station I : 4 folding pockets for 1-4 parallel folds Station II : 2 folding knives for 1-2 knife folds Paper Weight Recommended paper weight: 45-70 g/m² Capacity Leaflet length below 320 mm – up to 200/min Leaflet length above 320 mm- up to 150/min Drive From the cartoning machine - via a chain Noise pressure level : 80 dB (A) ( Without sound insulation ) Dimensions / weight Length x width x height 0,963 x 0,998 x 0,619 m FA21/4 – 2K Folding unit – approx. 200 kg Paper specifications : The following demands relating to paper quality and paper storage apply in the case of thin papers in order to allow fault- free operation : Material : wood-free matt, glazed thin printing paper Paper weight: 40-80 g/m² Thickness ( Din 53105, part 1 ) – 55 um ( 52-58) Format : as required, e.g 21x30 cm / four-sided angled guillotine cut / on four sides +/-0,5 mm Fibre direction for paper From 40-80 g/m² : 90° towards folding edge Porosity ( Bendtsen ) : 60 ml/min ( 30-90) Smoothness/sec. in accordance with BEKK : 60 ( 30/90) Relative assimilation humidity 52 % ( 46/58 ), 20° Ash : 15 % (13/17) Brightness DIN 53145 , Part 2 : 75 Opacity : 75 Luminance ( ciba – geigy scales ) : 6 Double folds 150 means value both LR Flexural STRENGTH IN 7 Mn mean value / accordance with 2-points: longitudinal – horizontal ( method DIN 53122 ) Storage: In piles, sealed air tight in film, with same format cover and base card ( 1 mm ) Static charging: in order to avoid static charging, the sealed paper piles must be stored in refrigerators and not removed until shortly before they are used .
Via XXV Aprile, 8
21054 Fagnano Olona (VA)
Italia
Tel. +39 0331 1693557
email: inti@intisrl.it