+39 0331 1693557 inti@intisrl.it

INTIMAC

OUR EXPERIENCE AT YOUR SERVICE

Production and packaging machinery for the pharmaceutical, chemical and cosmetic industry

Capsule Filling Machines/Capsule Polishing Machines

We carry out the complete revamping of the machines

Download of all our available used machinery

Capsule Filling Machines/Capsule Polishing Machines [9]

Romaco Macofar Capsule filler for pellets Romaco Macofar MT80
Capsule filler for pellets Romaco Macofar MT80
IT119
Romaco Macofar
MT80
2000

Automatic capsule filler Romaco Macofar model MT80 for a produccion up to 80.000 capsule per hour.
The machine include format n°2 for pellets.

more info
MG2 Capsule filler MG2 G140
Capsule filler MG2 G140
IT120
MG2
G140
2001

G140 dosing machines for hard gelatine capsules, developed by MG2 to satisfy the pharmaceutical industry’s requirements of high-performance easy-to-use equipment, offering a perfect combination of efficiency, quality and ease of use.
Suitable for medium and high production processes.
G140 is equipped with leading-edge software for operator machine control and for the weight control systems, fully compliant with the 21 CFR Part 11 regulations for handling electronic records (ER) and pre-arranged for electronic signature (ES).
Mechanical design: continuous motion.
Speed (capsules/hour): 140.000.
Capsule sizes: 00-5; DB; Elongated; HPMC.
Products range: Pellets; Powder; Tablets; Low dosages of powder.
Some dosing combinations: Powder + tablets; Pellets + tablets.
Weight control systems.
The machine is set up for powder with formats 0-1-2-3-4.

more info
Klöckner Pentaplast Sachet Machine Klöckner Pentaplast Wolkogon DR - B 54
Sachet Machine Klöckner Pentaplast Wolkogon DR - B 54
IT024
Klöckner Pentaplast
Wolkogon DR - B 54
1988

Strip machine Klöckner Pentaplast (Model: Wolkogon DR - B 54; Marca Klöckner Pentaplast) to pacl tablets , capsules etc. in strips.
Width max. of the strip 90 mm.
Speed max. 20/min min. 8 min.
Dimensions 870 x 900 x 1100 mm height.
Weight 350 Kg.

more info
MG2 Capsule Filling Machine/Capsule Polishing Machine MG2 Futura
Capsule Filling Machine/Capsule Polishing Machine MG2 Futura
IT118
MG2
Futura
2000

16 stations, at the moment only 4 with size 0
Capacity: 50 000 capsules/hour but at the moment can run up to 12.000 hour
Can fill powder and tablets
Including vacuum pump

more info
MG2 Capsule Filling Machine MG2 Futura for powders, pellets and micro tablets
Capsule Filling Machine MG2 Futura for powders, pellets and micro tablets
IT304
MG2
Futura
1996

Capsule filler MG2 Futura
Suitable for powders, pellets and micro tablets.
Speed: 48.000 capsules/h.
Length: 1200 mm
Width:1200 mm
Height:1900 mm
Weight:1500 kg
Formats included: 0L-0-1-2-3-4

more info
IMA Empty capsule sorter IMA
Empty capsule sorter IMA
IT367
IMA
unknown
n/a

more info
Romaco Macofar Capsule Filling Machines/Capsule Polishing Machines Romaco Macofar CD-40
Capsule Filling Machines/Capsule Polishing Machines Romaco Macofar CD-40
IT375
Romaco Macofar
CD-40
2005

Romaco Macofar’s compact, intermittent- motion capsule filling and closing machines are chosen by users all over the world for their flexibility and user-friendliness.
The machines are ideal for small to medium production runs, with mechanical speeds ranging from 40,000 capsules per hour.
The dosators are vacuum assisted, which allows powders with difficult flow characteristics to be handled, giving improved compaction of powder.
Highlights
• Outstanding filling accuracy via vertical- action vacuum dosators
• Capability to fill a wide range of powders
• Minimum format parts for fast changeover
• Optional automatic feeding groups for products and capsules
• Full technical documentation for validation purposes
Technical data :
• Output capsules 40.000/hour
• Capsules size include with the machine N°00 for powder
• Standard voltage 380 V – 3ph 50 Hz
• Rated powder 3,5 kW
• Air consumption NI/ min 150
• formats included 00-0-1

more info
BONAPACE Capsule Filling Machines BONAPACE INCAP
Capsule Filling Machines BONAPACE INCAP
RS398
BONAPACE
INCAP
n/a

IN-CAP: the first bench top capsule filling machine fully automatic A new dosator powder filling system has been developed to compliment the existing dosing disc filling system currently available.This new system will enable powders to be developed for all types of production equipment, as well as allowing different types of product to be handled in the way best suited to their characteristics. The system consists of a ring of dosator tubes, each with an internal pin which forms the chamber. The length of this chamber is centrally adjustable, to suit the filling requirements. The dosators are raised and lowered each cycle, while being rotated as the machine indexes.The tubes are lowered in the powder bed of the hopper, with an adjustable tamping facility if required for forming a slug of product. They continue to rotate until located over the open body of the capsule when the dosator pin is used to push the powder out of the chamber and into the capsule. The hopper consists of an annular ring, minimising the amount of product needed to allow the unit to run. The depth of the powder bed is adjustable while the residual product is agitated after the dosing station. A bulk hopper feds powder to this device and has been designed to minimise the problems of bridging experienced with some products
Technical data
• Capsule sizes: 000 - 00 - 00el - 0 - 0el - 1 - 1el - 2 - 3 - 4 - 5 - all DBCsaps
• Electric voltage: 230-110 Volts - 50- 60 cycles - single phase
• DC Motor: 160 Watt - 24 Volts
• Vacuum pump for capsule opening: capacity 6 m3/hour
• Aspirating vacuum pump: capacity 90 m3/hour Delta P. 120 Millibar
• Air compressor: capacity 50.l/minute - working pressure 6 Bar
• Electric absorption: 0,5 kW (including the vacuum pump)
• Net weight of the standard machine: 150 kg (approx. )

more info
BOSCH Capsule Filling Machines BOSCH GFK 2500
Capsule Filling Machines BOSCH GFK 2500
RS401
BOSCH
GFK 2500
2006

Very reliable „working horse type“production machine
Small footprint and height (integrated hoppers)
Lowest in class powder loss due to slide gate technology
Lowest centrifugal forces and small size station design and therefore highest possible product yield
Flexible dosing alternatives, up to 3 fills/capsule
Integrated ASB function (automatic trouble shooting)
Guarantees maximum productivity
ASB 100% optional (mono-block machine incl. ASB in combination with 100% checkweighing) pellets dosing via powder station, due to slide gate technology
Size parts change and cleaning procedure performed by only one person, due to design of the components
Feedback-loop to compensate weight trends available
Operator-free production possible due to ASB and feedback- loop
Mobile HMI with 21-inch touch screen display with clear presentation of data
Technical specifications
2500 ASB 100%
Output 150 000 capsules/h
Machine cycles 140 cycles/min
Number of capsules/segments 18
Voltage, machine 380– 480 V, 50/60 Hz, 3ph/PE, 3 kW,
special voltages
Connections:
Compressed air supply Ø 13 mm
Vacuum connection Ø 30 mm
Dust collector electrical connection 2 x Ø 70 mm
Vacuum pump electrical connection
Jogging cable connection
Infeeds
Powder infeed – Tri-clamp DN 150, DIN 32676
Pellet/tablet infeed – Tri-clamp DN 100, DIN 32676
Empty capsule infeed – Tri-clamp DN 100, 32676
Formats Capsule format set for all standard capsule sizes, different formats included

more info

CONTACTS

INTIMAC s.r.l.

Via XXV Aprile, 8

21054 Fagnano Olona (VA)

Italia

Tel. +39 0331 1693557

email: inti@intisrl.it

TRADEMARKS