+39 0331 1693557
inti@intisrl.it
Download of all our available used machinery
Blistering rming machine Bosch TLT 2600
PP-film max. 260 mm.
Usable web width max 245 mm (strip length max. 120 mm).
Strip configuration 2 lane, across.
Indexing max. 212 mm.
Depth of draw max. 10 mm.
Film speed max. 13 m/min.
Cutting die max 300 cycle/minute (or 600 blisters/min).
Forming station max. 110 forming cycles/min.
Blister machine Marchesini MB 440 for PVC - ALU.
Up to 56 cycles per minute and 448 blister per minute .
Inspection camera . Automatic feeder for tablets.
Cartoner for blister Marchesini Model MA 305.
Continuous movement machine.
Automatic blister feeding.
GUK leaflet folder.
Bar code reader.
Booklet feeder.
System coding for the cartons .
Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm.
Speed up to 240 cartons per minute.
Blister machine PLANER PHARMA Bpac
Maximum width of forming film: 160 mm.
Forming area: 150 x 125 mm.
Maximum forming depth: 15 mm.
Mechanical output: 100 cycles per minute.
Output of blister: 300 blisters per minute.
Reel of thermoforming film: 500 mm.
Reel of lidding film: 300 mm.
Inlet air pressure: 6-8 bar.
Feeding: Manual(can be automatic).
Forming type: Vacuum.
Blister machine for birth control pills IWK BP300
Maximum width of forming film: 150 mm.
Maximim forming depth: 12 mm.
Mechanical output: 65 cycles per minute.
Output of blister: 300 blisters per minute.
Reel of thermoforming film: 450 mm diameter.
Reel of lidding film: 250 mm diameter.
Air consumption: ca. 10 Nm3/h.
Operating pressure: 6-7 bar.
Cooling water: 0,12 M3/h.
Power consumption: 12 Kw.
Weight: 1600 Kg.
Tablet feeding system: dedicated feeder for 3 differents tablets.
Color camera system with automatic discharge.
Blister machine Marchesini MB 440 for PVC - ALU from 1994.
Up to 56 cycles per minute and 448 blister per minute.
Inspection camera.
Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994.
Continuous movement machine.
Automatic blister feeding.
Check weigher Garvens S2.
Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of:
Support for the foil of the forming material.
Digital thermoregulators at controlled limits.
Preheating station with easily replaceable plates treated non-stick.
Formation station with "rotary" movement.
Welding station with "rotary" movement.
Limiter of the cooling water circuit when the machine is stopped.
Sealing material foil holder.
Internal diameter 70-76 mm.
External diameter maximum 300 mm.
Transfer system from the blister of the cutting die to the blister magazine.
Motorization with self-locking three-phase motor with variable speed through inverter.
Vacuum pump dry.
air pressure and air control.
Protection in plexiglas with safety microswitches.
Controls of minimum level foils sealing and formation materials, with a pre - alarm signal on the panel.
Power supply: Voltage and frequency 50 Hz - 380 V.
Display status machine.
Remote control push button.
Maximum width of forming material: 256 mm.
Maximum depth of forming: 12 mm.
Mechanical speed: from 25 to 50 cycles/minute.
Maximum index: 156 mm.
Consumption:
Maximum power installed: 11 KvA.
Water for cooling: 0.7/h at a pressure of 1-2 Bar.
Compressed air: 500 L/mn with a pressure of 6-7 bar.
Automatic Feeding for the capsules.
Blister machine Harro Hoeflinger model PFM 1
Year of manufacturing 1992.
The machine has universal feeder, camera for product control.
The machine has the following formats dimensions o blisters: 70 x 115 mm/56 x 96 mm/62 x 94 mm/74 x 123 mm/123 x 60 mm/45 x 92 mm/100 x 86 mm/106 x 75 mm/56 x 110 mm/70 x 98 mm.
Blister Machine Uhlmann UPS 2MT
Production: 15 – 50 strokes per minute.
for 12 mm depth forming.
15 – 40 storkes per minute.
for 28 mm depth forming.
Index: Max. 145 – 222 mm.
Format range: forming area 220 mm length.
188mm width.
Depth forming: 12 and 28 mm.
Forming reel: 460 mm.
Covering reel: Max. 300 mm.
Forming thickness: Min. 0,1 mm – max. 0,5 mm.
Width covering foil: min. 90mm.
max. 210mm.
Of the internal reel: 70......76.
Water consumption: aprox. 0,1 m3/h
Compress air consumption: aprox. 6 Nm3/h, without pre heating;
: aprox.14Nm3/h , with pre heating.
Blister Machine for ampoules, cartridge and vials Uhlmann UPS 1020
Weight of the machine: approx 3.000 Kg (depending on machine version).
Electric supply: 380 V, 50 cycles from mains.
Connected load: 13 kW.
Average power consumption: 7 kW.
Air pressure supply: NW 19 from supply system.
Air pressure consumption: 20 Nm3/h.
Supply pressure: 6…8 bar.
Cooling supply inlet/outlet: Pipe thread 1/2”.
Inlet temperature: 10…20°C
MACHINE PERFORMANCE:
Output: Max. 300 blisters/min.
Strokes: min 15 strokes/min - max 60 strokes/min.
FORMAT RANGE:
Index length: 50….112 mm (infinitely variable).
Punching area: max 110 mm in web travel direction x 180 mm in width.
Foil width: max. 200 mm (station clearance) min 90 mm.
Blister machine Uhlmann Pack-System UPS4 ETX
FORMAT RANGE
Single-stroke index: min. 62 mm, max. 272 mm.
FORMING DEPTH
PVC: 12 mm, 28 mm, 35 mm
BLISTER FORMAT
Min: 60 mm
Max: 140 mm x 39 mm
PUNCHING AREA
Length: 272 mm
Width: 284 mm
FORMING FILM
Forming film width: min. 100 mm, max. 298 mm
Reel diameter: max. 400 mm(unwind shaft), max. 800 mm (reel support)
Core diameter: 76 mm
LID FOIL
Lid foil width: min. 100 mm, max. 298 mm
Reel diameter: max. 300 mm (unwind shaft), max. 460 mm (paper lidding material)
Core diameter: 76 mm
FILMS AND FOIL
Processible forming films: PVC, PVC/PVDC, PVC/Aclar, PP, PS, PET
Processible lid foils: Aluminium hard, aluminium soft, Paper, Paper/AL, Polyester/PE, Polyester/AL, PVC.
Marchesini FC420 thermoforming machine for pre-filled syringes with feeding system.
High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled.
Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc.
Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service.
Main features:
Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability. Easy, tool-less change over:
index change and size-related parameters automatically selected from HMI. Pick-and-Place for products. Prepared for connection from/to in-line integrated machines. High-speed fully automatic positive products feeding systems are available. High draw depth (up to 42 mm). ZERO-WASTE version (FBZ) with quick die-cutter available (subject to the format configuration)
Heating and Forming Station:
Hardened non-sticking heating plates with individual temperature controls. The film is heated up over multiple pitches. The plates open apart at each machine stop to avoid film overheating. Temperature controllers are integrated in the main HMI. Forming station, mechanically driven through servo motor. Mechanical pre-forming station. The thermoforming is achieved by the use of compressed air combined with the mechanical plug-assist. The thermoforming mould is cooled down.
FORMAT CHANGE
Simple and fast, without the use of tools. The molds, guides and the cutter slide into the stations from the operator side, to a fixed position and are locked with handles.
All variable parameters are selectable from operator panel, under recipe to format. A special format trolley is included in the supply of the basic machine.
PICK AND PLACE:
The robotic product feeding system is integrated into the basic machine. The Pick and Place has been specifically designed to gently handle and feed fragile products. The pick-and-place precision, its automatic synchronization with the product pick-up and the formed tray position along with the easy changeover make the system highly reliable, efficient and innovative.
Developed to guarantee:
Quick and accurate tool-less changeover; selectable from the HMI; High flexibility of product range; Efficiency and care in the product handling; Optimization of production time thanks to a higher output; Maximum ease in cleaning and visibility; The pick-and-place system is equipped with the most appropriate infeed systems according to the product to be handled.
The syringes arrive hanging in single line, from an upstream connected machine: a continuous motion synchrodynamic system lays the syringes down in pitch onto the plug-in conveyor pockets, from which they are positively picked-up by the Pick and Place system.
Max forming depth (mm): 42 mm
Mechanical speed,Forming/Sealing (Intermittent motion): 8-50 cycles/min
Mechanical speed Standard Cutter: 8-50 cycles/min
Max forming area:
Film width (A): max 254 mm
Film index (B): 320 mm
Max die-cutting area:
Film width (A): 248 mm
Film index (B): 310 mm
Output: max 48.000/h
Outfeed height: 800-860 mm
Installed power: with sealing station: 36 Kw; without sealing station: 30 Kw
Compressed air consumption (6-8 bar): with sealing station: 1150 Nl/min; without sealing station: 1000 Nl/min
Cooling water consumption: with sealing station: approx. 370 L/h; without sealing station: approx. 300 L/h
Net weight: 7000 Kg
This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size.
The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment.
PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across the feeding area where the blisters are filled with product.
The filled blisters now pass into the sealing station where they are covered with aluminium top foil which is drawn from a reel mounted above. The heated top sealing plate on this station incorporates coding digits to allow a code to be embossed as the blisters are sealed. Air- operated grippers then pull the web forward through a short cooling plate before they are cut out from the web.
The web now passes into the guillotine cutting station, where the blisters are cut out and discharged down a chute where they can be collected in a suitable container.
All operator controls are located in a console on the right hand side, including the thermostats and temperature gauges. Two interlocked, large sliding Perspex doors protect the operator from the moving parts of the machine. At the rear of the machine cabinet there are hinged doors for easy access for cleaning and maintenance purposes.
TECHNICAL SPECIFICATIONS:
Maximum capacity : 50 strokes/min with 10.0 mm draw-depth 35 strokes/min with 16.0 mm draw-depth
30 strokes/min with 18.5 mm draw-depth
Maximum forming area :110 x 150 mm
Maximum foil width :170 mm
Max. Ø PVC roll :400 mm
Max. Ø aluminium foil roll :240 mm
Power consumed :5.0 kw (average)
Total connected power :8.0 kw (peak consumption)
The machine requires an external supply of compressed air and a chiller unit to be connected – we can offer a suitable chiller unit at extra cost if required.
Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled.
Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc.
Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service.
Main features: Independently servo-driven machine stations.
Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability
Easy, tool-less change over: index change and size-related parameters automatically selected from HMI Integrated Robomaster for products Pick-and-Place.
Prepared for connection from/to in-line integrated machines.
High-speed fully automatic positive products feeding systems are available.
High draw depth (up to 42 mm)ZERO-WASTE version (FBZ) with quick die-cutter available (subject to the format configuration).
Max forming depth (mm) 42 mm;
Mechanical speed Forming/Sealing 8-50 cycles/min;
Mechanical speed Standard Cutter 8-50 cycles/min;
Max forming area Film width (A) max 254 mm Film index (B) 320 mm;
Max die-cutting area Film width (A) 248 mm;
Film index (B) 310mm.
Output max. 48.000 syringes/h.
Power installed machine with sealing station 36 KW;
Compressed air consumption (6-8 bar) machine with sealing station 1150 Nl/min;
Cooling water consumption machine with sealing station ca. 370 L/h;
Via XXV Aprile, 8
21054 Fagnano Olona (VA)
Italia
Tel. +39 0331 1693557
email: inti@intisrl.it
