Machine d’emballage sous blister

Nous effectuons le revamping complet des machines

Téléchargez le catalogue complet

Machine d’emballage sous blister [27]

BOSCH Machine d’emballage sous blister BOSCH  TLT 2600
Machine d’emballage sous blister BOSCH TLT 2600
IT036
BOSCH
TLT 2600
2000

Blisteradora Bosch TLT 2600
PP – film max. 260 mm.
Anchura maxima film de moldeado max. 260 mm (largo strip max. 120 mm).
Disposicion de formacion en dos lineas alineadas.
Avance max. 212 mm.
Profundidad maxima de moldeado max. 10 mm.
Velocidad del film max. 13 m/min.
Estacion de corte max. 300 golpes/minuto (o 600 blisters/min).

demande d'informations
MARCHESINI GROUP Machine d’emballage sous blister MARCHESINI GROUP MB 440 - MA 305
Machine d’emballage sous blister MARCHESINI GROUP MB 440 - MA 305
IT038
MARCHESINI GROUP
MB 440 - MA 305
2002

Blister machine Marchesini MB 440 for PVC - ALU.
Up to 56 cycles per minute and 448 blister per minute .
Inspection camera . Automatic feeder for tablets.
Cartoner for blister Marchesini Model MA 305.
Continuous movement machine.
Automatic blister feeding.
GUK leaflet folder.
Bar code reader.
Booklet feeder.
System coding for the cartons .
Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm.
Speed up to 240 cartons per minute.

demande d'informations
PLANER PHARMA Machine d’emballage sous blister PLANER PHARMA Bpac
Machine d’emballage sous blister PLANER PHARMA Bpac
IT039
PLANER PHARMA
Bpac
2003

Blister machine PLANER PHARMA Bpac
Maximum width of forming film: 160 mm.
Forming area: 150 x 125 mm.
Maximum forming depth: 15 mm.
Mechanical output: 100 cycles per minute.
Output of blister: 300 blisters per minute.
Reel of thermoforming film: 500 mm.
Reel of lidding film: 300 mm.
Inlet air pressure: 6-8 bar.
Feeding: Manual(can be automatic).
Forming type: Vacuum.

demande d'informations
IWK Machine d’emballage sous blister IWK BP300
Machine d’emballage sous blister IWK BP300
IT040
IWK
BP300
1990

Blister machine for birth control pills IWK BP300
Maximum width of forming film: 150 mm.
Maximim forming depth: 12 mm.
Mechanical output: 65 cycles per minute.
Output of blister: 300 blisters per minute.
Reel of thermoforming film: 450 mm diameter.
Reel of lidding film: 250 mm diameter.
Air consumption: ca. 10 Nm3/h.
Operating pressure: 6-7 bar.
Cooling water: 0,12 M3/h.
Power consumption: 12 Kw.
Weight: 1600 Kg.
Tablet feeding system: dedicated feeder for 3 differents tablets.
Color camera system with automatic discharge.

demande d'informations
Uhlmann Machine d’emballage sous blister Uhlmann UPS 4
Machine d’emballage sous blister Uhlmann UPS 4
IT041
Uhlmann
UPS 4
1993

Datos tecnicos Thermoformer UPS4
Año de fabricacion 1993.
Min.-max. ancho de la formacion 62 - 226 mm.
Produccion: 15-50 golpes/min.
Profundidad: PVC 12 mm ALU 10 mm.
Formato blister: min. 60 mm max. 140x39 mm.
Punching Area: Ancho 226 mm largo 284 mm.
Largo forming film: min. 100 mm max. 298 mm.
Ancho Lidfoil: min. 100 max.298
FORMATOS: PVC/ALU - 6 blisters de 39x94 mm ALU7ALU - 7 blisters de 38x86 mm.
Controlo: PacControl versione 2.17.
Sin telecamara Hapa Printer - H231-1.

demande d'informations
MARCHESINI GROUP Machine d’emballage sous blister MARCHESINI GROUP MB 440 - MA 355
Machine d’emballage sous blister MARCHESINI GROUP MB 440 - MA 355
IT043
MARCHESINI GROUP
MB 440 - MA 355
1994

Blister machine Marchesini MB 440 for PVC - ALU from 1994.
Up to 56 cycles per minute and 448 blister per minute.
Inspection camera.
Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994.
Continuous movement machine.
Automatic blister feeding.
Check weigher Garvens S2.

demande d'informations
Partena Machine d’emballage sous blister Partena MX
Machine d’emballage sous blister Partena MX
IT044
Partena
MX
1993

Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of:
Support for the foil of the forming material.
Digital thermoregulators at controlled limits.
Preheating station with easily replaceable plates treated non-stick.
Formation station with "rotary" movement.
Welding station with "rotary" movement.
Limiter of the cooling water circuit when the machine is stopped.
Sealing material foil holder.
Internal diameter 70-76 mm.
External diameter maximum 300 mm.
Transfer system from the blister of the cutting die to the blister magazine.
Motorization with self-locking three-phase motor with variable speed through inverter.
Vacuum pump dry.
air pressure and air control.
Protection in plexiglas with safety microswitches.
Controls of minimum level foils sealing and formation materials, with a pre - alarm signal on the panel.
Power supply: Voltage and frequency 50 Hz - 380 V.
Display status machine.
Remote control push button.
Maximum width of forming material: 256 mm.
Maximum depth of forming: 12 mm.
Mechanical speed: from 25 to 50 cycles/minute.
Maximum index: 156 mm.
Consumption:
Maximum power installed: 11 KvA.
Water for cooling: 0.7/h at a pressure of 1-2 Bar.
Compressed air: 500 L/mn with a pressure of 6-7 bar.
Automatic Feeding for the capsules.

demande d'informations
Harro Hoeflinger Machine d’emballage sous blister Harro Hoeflinger PFM 1
Machine d’emballage sous blister Harro Hoeflinger PFM 1
IT045
Harro Hoeflinger
PFM 1
1992

Blister machine Harro Hoeflinger model PFM 1
Year of manufacturing 1992.
The machine has universal feeder, camera for product control.
The machine has the following formats dimensions o blisters: 70 x 115 mm/56 x 96 mm/62 x 94 mm/74 x 123 mm/123 x 60 mm/45 x 92 mm/100 x 86 mm/106 x 75 mm/56 x 110 mm/70 x 98 mm.

demande d'informations
Uhlmann Machine d’emballage sous blister Uhlmann UPS 2MT
Machine d’emballage sous blister Uhlmann UPS 2MT
IT046
Uhlmann
UPS 2MT
1990

Blister Machine Uhlmann UPS 2MT
Production: 15 – 50 strokes per minute.
for 12 mm depth forming.
15 – 40 storkes per minute.
for 28 mm depth forming.
Index: Max. 145 – 222 mm.
Format range: forming area 220 mm length.
188mm width.
Depth forming: 12 and 28 mm.
Forming reel: 460 mm.
Covering reel: Max. 300 mm.
Forming thickness: Min. 0,1 mm – max. 0,5 mm.
Width covering foil: min. 90mm.
max. 210mm.
Of the internal reel: 70......76.
Water consumption: aprox. 0,1 m3/h
Compress air consumption: aprox. 6 Nm3/h, without pre heating;
: aprox.14Nm3/h , with pre heating.

demande d'informations
IMA Machine d’emballage sous blister IMA C61
Machine d’emballage sous blister IMA C61
IT047
IMA
C61
n/a

demande d'informations
IMA Machine d’emballage sous blister IMA C60
Machine d’emballage sous blister IMA C60
IT048
IMA
C60
n/a

demande d'informations
Uhlmann Machine d’emballage sous blister Uhlmann UPS 1020
Machine d’emballage sous blister Uhlmann UPS 1020
IT051 20-00046
Uhlmann
UPS 1020
1995

Blister Machine for ampoules, cartridge and vials Uhlmann UPS 1020
Weight of the machine: approx 3.000 Kg (depending on machine version).
Electric supply: 380 V, 50 cycles from mains.
Connected load: 13 kW.
Average power consumption: 7 kW.
Air pressure supply: NW 19 from supply system.
Air pressure consumption: 20 Nm3/h.
Supply pressure: 6…8 bar.
Cooling supply inlet/outlet: Pipe thread 1/2”.
Inlet temperature: 10…20°C
MACHINE PERFORMANCE:
Output: Max. 300 blisters/min.
Strokes: min 15 strokes/min - max 60 strokes/min.
FORMAT RANGE:
Index length: 50….112 mm (infinitely variable).
Punching area: max 110 mm in web travel direction x 180 mm in width.
Foil width: max. 200 mm (station clearance) min 90 mm.

demande d'informations
Uhlmann Machine d’emballage sous blister Uhlmann UPS4 ETX
Machine d’emballage sous blister Uhlmann UPS4 ETX
IT213
Uhlmann
UPS4 ETX
2001

Blister machine Uhlmann Pack-System UPS4 ETX
FORMAT RANGE
Single-stroke index: min. 62 mm, max. 272 mm.
FORMING DEPTH
PVC: 12 mm, 28 mm, 35 mm
BLISTER FORMAT
Min: 60 mm
Max: 140 mm x 39 mm
PUNCHING AREA
Length: 272 mm
Width: 284 mm
FORMING FILM
Forming film width: min. 100 mm, max. 298 mm
Reel diameter: max. 400 mm(unwind shaft), max. 800 mm (reel support)
Core diameter: 76 mm
LID FOIL
Lid foil width: min. 100 mm, max. 298 mm
Reel diameter: max. 300 mm (unwind shaft), max. 460 mm (paper lidding material)
Core diameter: 76 mm
FILMS AND FOIL
Processible forming films: PVC, PVC/PVDC, PVC/Aclar, PP, PS, PET
Processible lid foils: Aluminium hard, aluminium soft, Paper, Paper/AL, Polyester/PE, Polyester/AL, PVC.

demande d'informations
MARCHESINI GROUP Machine d’emballage sous blister MARCHESINI GROUP FC420
Machine d’emballage sous blister MARCHESINI GROUP FC420
IT306
MARCHESINI GROUP
FC420
n/a

Macchina termoformatrice Marchesini FC420 per siringhe pre-riempite con sistema di alimentazione.
Macchina per alte produzioni, in piano, a balcone, motorizzazione brushless indipendente per ciascuna stazione, finitura acciaio inox, gestita da PC. Robustezza, modularità, semplicità di funzionamento e facilità dei cambi formato rendono la macchina affidabile, flessibile, efficiente e di semplice manutenzione.
Caratteristiche principali:
Stazioni indipendenti con motorizzazione brushless. Velocità macchina regolabile da pannello, richiamando il formato. Doppio gruppo di traino a pinze. grande precisione del passo.
Cambio formato rapido e semplice, senza l’ausilio di utensili: il passo ed i parametri a formato sono selezionati automaticamente dal pannello selezionando la ricetta a formato. Pick-and-Place prodotti
Predisposta per collegamenti in linea da/per macchine integrate. Ampia gamma di sistemi di alimentazione automatica prodotti ad alta velocità, di tipo positivo. Alta profondità di formatura (fino a 42 mm).
Disponibile anche nella versione a ZERO sprechi (FBZ) con trancia veloce (a seconda della configurazione del formato).
Stazione di Preriscaldo e Formatura:
Piani riscaldanti a contatto, antiaderenti con controllo di temperatura individuale.
Il materiale è riscaldato su passi multipli.
Apertura dei piani ad ogni arresto macchina per evitare surriscaldamento del materiale.
I termoregolatori sono integrati nel pannello operatore.
Stazione formatura meccanica, azionata da motore brushless.
Stazione preformatura meccanica.
La termoformatura è ottenuta utilizzando aria compressa in combinazione al preformatore meccanico. Lo stampo di formatura è costantemente raffreddato.
CAMBIO FORMATO
Semplice e veloce, senza l’utilizzo di utensili. Gli stampi, le guide ed il trancia scorrono nelle stazioni dal lato operatore, fino ad una posizione fissa e vengono bloccati con maniglie a ripresa.
Tutti i parametri variabili sono selezionabili da pannello operatore, sotto ricetta a formato. Un apposito carrello portaformati è incluso nella fornitura della macchina base.
PICK AND PLACE:
Il Pick and Place è stato specificatamente sviluppato per l’alimentazione e la manipolazione di prodotti delicati e fragili.
La precisione nel prelievo e nel deposito, la sincronizzazione automatica del sistema con le posizioni di presa prodotto e deposito nel nastro formato, assieme alla facilità di cambio formato rendono il sistema affidabile, efficace ed innovativo.
È sviluppato per garantire:
Massima semplicità nel cambio formato (senza utensili) e con regolazioni selezionabili sotto ricetta da pannello; Grande flessibilità nella gamma di prodotti trattabili; Efficienza e cura nel trattamento del prodotto; Ottimizzazione dei tempi di produzione grazie ad una maggiore velocità; Massima semplicità nella pulizia.
Il Pick and Place è completato di volta in volta dal sistema di ingresso prodotto più appropriato.
Le siringhe arrivano dalla macchina a monte appese su fila singola: vengono messe a passo da un sincronizzatore che le deposita in continuo nei cassetti del trasportatore plug-in, da cui vengono prelevate in positivo dal sistema di Pick and Place.
Profondità formatura max (mm): 42 mm
Velocità meccanica, Formatura/Saldatura (moto alternato): 8-50 cycles/min
Velocità meccanica trancia standard: 8-50 cycles/min
Area formatura massima (mm):
Fascia (A): max 254 mm
Passo (B): 320 mm
Area taglio massima (mm):
Fascia (A): 248 mm
Passo (B): 310 mm
Velocità: max 48.000/h
Altezza di uscita: 800-860 mm
Potenza installata: con stazione di saldatura: 36 Kw; senza stazione di saldatura: 30 Kw
Consumo aria compressa (6-8 bar): con stazione di saldatura: 1150 Nl/min; senza stazione di saldatura: 1000 Nl/min
Consumo acqua raffreddamento: con stazione di saldatura: ca. 370 L/h; senza stazione di saldatura: ca. 300 L/h
Peso netto: 7000 Kg

demande d'informations
Uhlmann Machine d’emballage sous blister Uhlmann
Machine d’emballage sous blister Uhlmann
IT352
Uhlmann
UPS300
2001

Dies ist eine vollautomatische Blisterpackmaschine mit intermittierender Bewegung und einer Kapazität von bis zu 50 Zyklen pro Minute. Die maximale Leistung beträgt 200 Blister pro Minute, abhängig von der Blistergröße.

Die Maschine ist in „Balkonbauweise“ ausgeführt - alle relevanten Stationen sind Einzelmodule, die aus einer großen Aluminiumplatte herausragen, die die Vorderseite des Maschinengehäuses bildet. Der Rest des Maschinenschranks besteht aus Stahl und beherbergt die Antriebseinheit, Getriebezüge, Kettenantriebe und die elektrischen Steuergeräte.

PVC-, PVC / PVDC-, PVC / Aclar-Folie wird von einer Rolle gezogen und zuerst erwärmt und erweicht und dann in der Blisterformstation tiefgezogen. Die Blasen werden in der Form mit Hilfe von Druckluft geformt - die Bahn wird dann nach vorne gezogen und über den Zuführbereich, wo die Blasen mit Produkt gefüllt sind.

Die gefüllten Blasen gelangen nun in die Versiegelungsstation, wo sie mit Aluminiumfolie bedeckt sind, die von einer darüber montierten Rolle gezogen wird. Die beheizte obere Dichtungsplatte dieser Station enthält Codierungsziffern, damit ein Code beim Versiegeln der Blasen geprägt werden kann. Luftbetriebene Greifer ziehen die Bahn dann durch eine kurze Kühlplatte nach vorne, bevor sie aus der Bahn herausgeschnitten werden.

Die Bahn gelangt nun in die Guillotinen-Schneidestation, wo die Blasen ausgeschnitten und über eine Rutsche entladen werden, wo sie in einem geeigneten Behälter gesammelt werden können.

Alle Bedienelemente befinden sich in einer Konsole auf der rechten Seite, einschließlich der Thermostate und Temperaturanzeigen. Zwei ineinandergreifende, große Plexiglasschiebetüren schützen den Bediener vor den beweglichen Teilen der Maschine. Auf der Rückseite des Maschinenschranks befinden sich Flügeltüren für einen einfachen Zugang zu Reinigungs- und Wartungszwecken.

TECHNISCHE SPEZIFIKATIONEN:

Maximale Kapazität: 50 Hübe / min bei 10,0 mm Zugtiefe 35 Hübe / min bei 16,0 mm Zugtiefe
30 Hübe / min mit 18,5 mm Zugtiefe
Maximale Formfläche: 110 x 150 mm
Maximale Folienbreite: 170 mm

Max. Ø PVC-Rolle: 400 mm
Max. Ø Aluminiumfolienrolle: 240 mm
Leistungsaufnahme: 5,0 kW (Durchschnitt)
Gesamtanschlussleistung: 8,0 kW (Spitzenverbrauch)

Die Maschine benötigt eine externe Druckluftversorgung und einen Anschluss einer Kühleinheit. Bei Bedarf können wir gegen Aufpreis eine geeignete Kühleinheit anbieten.

demande d'informations

CONTACTS

INTIMAC s.r.l.

Via XXV Aprile, 8

21054 Fagnano Olona (VA)

Italia

Tel. +39 0331 1693557

email: inti@intisrl.it

MARQUES TRAITÉES