High speed mixer granulator Aeromatic PMA 1800
Gross volume 1800 Lt.
Normal working volume 1500 Lt.
Average granulated batch weight 825 Kg.
Impeller speeds 59/118 rpm.
Impeller motor capacities 60/75 kW.
Granulator speeds 1500/3000 rpm.
Granulator motor capacity 7.5/11 kW.
High speed mixer granulator Aeromatic PMA 800
Gross volume 800 Lt.
Normal working volume 640 Lt.
Average granulated batch weight 350 Kg.
Impeller speeds 78/156 rpm.
Impeller motor capacities 30/36 kW.
Granulator speeds 1500/3000 rpm.
Granulator motor capacity 7.5/11 kW.
High speed mixer granulator Aeromatic PMA 400
Gross volume 400 Lt.
Normal working volume 320 Lt.
Average granulated batch weight 180 Kg.
Impeller speeds 78/156 rpm.
Impeller motor capacities 30/36 kW.
Granulator speeds 1500/3000 rpm.
Granulator motor capacity 7.5/11 kW.
High shear mixer Aeromatic Fielder Gea PMA25
Producer Aeromatic – Fielder Gea.
Model: PMA 25.
Gross: volume 25 Lt.
Normal working volume: 15 Lt.
Average granulated batch weight: max. 10 Kg.
Impeller speed: 243/486 RPM.
Impeller motor capacities: 4/5.5 kW.
Granulator speeds: 1500/3000 RPM.
Granulator motor capacity: 1.3/1.8 kW.
High speed mixer granulator Aeromatic PMA 300
•Total volume: 300 Lt.
•Max working volume: 225 Lt.
•Min. working volume: 75 Lt.
•Max. Batch: 130 Kg depending on the product
•Impeller speed: 108/216 rpm
•Power engine impeller: 8.2/11 kW
•Chopper Speed: 1500/3000 rpm
•Power engine chopper: 5.5/7.5 kW.
High speed mixer granulator: Aeromatic PMA 600
Gross volume: 600 Lt.
Normal working volume: 480 Lt.
Average granulated batch weight: 280 Kg
Impeller speeds: 86/172 rpm
Impeller motor capacities: 22/30 kW
Granulator speeds: 1500/3000 rpm
Granulator motor capacity: 7.5/11 kW
Lifting column Bohle mod. HS 300
Year of manufacture: 1998
Rated voltage Ub1: 3x400 V/PE/50 Hz
Control voltage: 24 VAC
Rated power: 0,85 Kw
Circuit diagram n°: E-2222-3
Weight: 460 Kg
Safe load: 300 Kg
Rated current I: 2,5 A
Full load current Imax: 2,8 A
Short circuit current: 16 A
Bohle container mixer model PM 1000 with 900 kg payload.
This stainless steel mixer is designed for the gentle mixing of dry and powdery products. The system consists of a box girder with lifting device and mixing tool as well as the mixing container.
Mobile mixing containers are brushed on the inside, industrially ground on the outside, all weld seams are ground and the surface is colored.
The diameter is approx. 1,100 mm, the height of the container is 1,290 mm, which means a total volume of approx. 800 liters with a maximum payload of 900 kg.
1 Bohle bucket container is included in the set
The mixing container is moved manually under the container holder and the mixing tool is lowered into the container using the hand control.
The container is now attached to the box girder with 4 quick-release fasteners.
The mixing element, consisting of two slightly curved bodies, creates a counter-current of the product. The product itself does not spin. Each time the container is turned, the direction of flow changes twice (see version).
The speed and length of the mixing time can be pre-selected.
After the mixing process, the speed is automatically set to the minimum. The value is reduced and then remains in the basic position. After returning to the starting position, the mixing tool is raised and the container can be removed.
The system is controlled via a separate control panel. Mixing time and mixing speed can be preset, additional 9-digit batch input no. as well as a 2-digit product number. as well as identifiable people. An integrated printer is used for documentation.
High speed mixer from 1995 updated in 2007
including a 500 liter bin.
For the data you can put max load 1500 Kg
Electrical data 3N - 400V / 16A
Pressure 6 bar
Compressed air consumption 300 liters per minute
Bachiller horizontal paddle mixer model MHT-4200
Machine designed for mixing products with large volumes for the pharmaceutical industry.
7000mm x 3000mm
Height 3400mm + 2000mm filter sleeves
Internal and external finish: Mirror polished Stainless steel. Total volume: 4200 litres Usable volume: 800 litres to 3000 litres. 2 bar Foot valve: yes, piston valve, pneumatically operated sleeve filter, Flat switch, Electric panel, Frequency converter, Sampler. ABB Motors 380 v / 50Hz Documentation: yes Programming: yes
INOXPA Powder Mixer model 'MBC-950 with a useful capacity of 600 litres
INOXPA Powder Mixer model 'MBC-950 with a useful capacity of 600 litres
IMA Hercules MIDI lifting columns are designed for handling drums, containers, IBCs, bins and small machines.
The system from 2003 consists of a rotating column lift, capable of lifting, by means of an arm, a palletised container (bin) and placing it with the discharge at the inlet of a process machine.
No part of the machine ever comes into contact with the product intended for the production process.
All the lifts in the Hercules series are designed to be floor-mounted and ceiling-mounted.
Main motor located in the base of the machine for easy maintenance.
Lifting action provided by a high strength chain. Carefully finished for easy cleaning.
TECHNICAL SPECIFICATIONS
Dimensions (WxDxH) mm 2000x650x3900
Machine weight kg 1.600
Weight of machine fully loaded (Kg) 2.600
Weight of the machine empty (Kg)
Voltage Volt 400 V - 50 Hz - 3 phase AC
Current A 6
Power kW 2.7
Frequency Hz 50 Phases 3
Mixing speed (rpm) - 4 ÷ 12
Lifting/lowering speed (m/sec) 0.08
Maximum lifting capacity kg 990
Maximum mixing capacity kg 500
Two operations in one go.
Premixing: The mixing tool, which rotates at 4 or 8 m/sec. near the bottom of the hopper, sets the mix in motion in the form of a drum.
in a drum-shaped movement. This ensures fast and uniform distribution of all dry components.
Smooth moist granulation:
Uniform wetting of all grains. A loose build-up granulate of up to 2 mm is produced. Larger lumps are beaten with
10 or 20 m/sec. of the chopper tool. Discharge takes place while the mixing tool is running. Moisture screening is not necessary in most cases before drying.
Pre-mixing approx. 2 min.
Damp granulation 2 - 4 min.
Discharge approx. 30 sec.
Short premixing and granulation times.
Uniform granulate. Particularly wide working range from light to very heavy masses. Low-noise operation and low wear. Low overall height, all parts easily accessible. Easy cleaning.
Dead space-free mixing interior.
Total capacity 800 l
Batch size for moist granulation, depending on the consistency of the recipe 280-350 kg
Main drive pole-changing 35/53 kW
Mould speed 49/98 rpm
Power transmission V-belt and worm gear
Chopper drive pole-changing 10/12 kW
Chopper speed 1460 / 2935 rpm
Machine footprint Length Width mm 3085 x 1765
Height to upper edge of mixing container: 1550 mm
Sep. control cabinet (incl. base) width/depth/height 800x400x1940 mm
Weight of machine 3450 kg
Weight of control cabinet 200 kg
Aeromatic PMA 800 high-speed mixer and granulator
Total volume 800 Lt.
Normal working volume 640 Lt.
Normal batch weight 350 Kg.
Blender speed 78/156 rpm.
Capacity of blender motor 30/36 kW
Granulator speed 1500/3000 rpm.
Granulator motor capacity 7.5/11 kW
high shear mixer glatt model fm - vg 800 from 2004 including cone mill glatt
total volume 800 liters max working capacity 480 kg.
The VG series granulators allow mixing, kneading, and granulating processes in a single vessel. They are equipped with a horizontally rotating main blade at the bottom of the vessel as well as a vertically rotating high-speed cross-screw on one side above the main blade. Through adding binder to base powder and utilizing tumbling and compaction effects, you can produce particles closer to the shape of a perfect sphere or particles heavier than those granulated on a fluidized bed. The vertical granulators have been designed and manufactured to comply with the FDA, GMP, and other international requirements regarding performance, safety, and so on. The solid performance and reliability in mixing, kneading, and granulating processes are proved by the fact that the granulators have been widely used in Japan as well as in the USA and Europe).
• Produce spherical particles denser than those granulated in a fluidized bed.
• Reduced cleaning time thanks to smooth surface of their vessel structure and a fewer number of assembly components and parts.
• Extremely fast and efficient mixing and granulation in a single machine at high production rates.
• Easy operation with a fewer parameter setting.
• Small footprint achieved by the compact body and limited space for their auxiliary equipment.
• Low cost of equipment including auxiliary equipment, and offer easy maintenance.
Via XXV Aprile, 8
21054 Fagnano Olona (VA)
Italia
Tel. +39 0331 1693557
email: inti@intisrl.it