dosing device

We carry out the complete revamping of the machines

Download of all our available used machinery

dosing device [756]

Norden GmbH  filling machines Norden GmbH  NM2002
filling machines Norden GmbH NM2002
24-1701
Norden GmbH
NM2002
2001

Filling line update to 2012
L10 has filled about 700,000,000 tubes since 2001
It has always worked smoothly and reliably with the 20g and 30g formats.
The set of wet parts for the 20g size can be supplied / would be included

more info
Norden GmbH  Cartoning Machines/Case packers Norden GmbH  NP2002S
Cartoning Machines/Case packers Norden GmbH NP2002S
24-1700
Norden GmbH
NP2002S
2001

Cartoning machine – update with 2012;
printing of variable data only by embossing (front and/or back). Good performance with small formats, most recently used mainly 20 & 30 g.

more info
DIOSNA High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors DIOSNA 2 4-6 L
High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors DIOSNA 2 4-6 L
24-1305
DIOSNA
2 4-6 L
2006

Diosna Pilot High Shear Granulator, Model P1/6, S/N 355-015, New 2006.
This unit is in excellent condition and contains 3 interchangeable shear bowls
Shear bowls in 2, 4 and 6 litre sizes. (Two of the bowl sizes share a common interchangeable mixing blade).
Integrated controls and plug-in operation
(1/60/110V).

more info
Kuka Overwrappers/Shrinkwrappers/Banders Kuka (V) KRC1
Overwrappers/Shrinkwrappers/Banders Kuka (V) KRC1
24-1696
Kuka
(V) KRC1
2001

palletizing robot
(top loader)

more info
Pester Pac Automation Cartoning Machines/Case packers Pester Pac Automation Compact U
Cartoning Machines/Case packers Pester Pac Automation Compact U
24-1698
Pester Pac Automation
Compact U
2001

Rely on our side loading technology. It has been proven in the average performance range of up to 20 cases/minute at the leading consumer companies around the world. Trust in this reliable machine performance with low life cycle costs.

Flexible product handling, wide format range, and intelligent intuitive machine operation are what make our side loading case packer an economical automation solution for efficient production.

Benefits
Compact, space-efficient design
Best machine performance with low life-cycle costs in 24/7 operation
Wide format range for high packaging diversity
Reliable case handling with innovative cascading case extraction
Safe case transport by means of 4 servo-controlled toothed belts with drivers
RFID format part detection available on request
Simple operation, quick format changeover and integrated format management
Straightforward reproducible format changeover in less than 10 minutes
PEWO-form UVP 2

Machine dimensions 6440 x 1670 x 2050 mm [L x W x H] Case type American case Sealing method tape / hotmelt glue Min. format range folding carton 30 x 12 x 66 mm [a x b x h] case 150 x 120 x 105 mm [L x W x H] Max. Format range folding carton 440 x 150 x 250 mm [a x b x h] case 450 x 320 x 320 mm [L x W x H] Performance up to 20 cases/min. Control system Schneider Electric PacDrive 3 / Rockwell Automation (Allen-Bradley)

more info
Pester Pac Automation Cartoning Machines/Case packers Pester Pac Automation Pewo-Form EVP2
Cartoning Machines/Case packers Pester Pac Automation Pewo-Form EVP2
24-1697
Pester Pac Automation
Pewo-Form EVP2
2001

Rely on our side loading technology. It has been proven in the average performance range of up to 20 cases/minute at the leading consumer companies around the world. Trust in this reliable machine performance with low life cycle costs.

Flexible product handling, wide format range, and intelligent intuitive machine operation are what make our side loading case packer an economical automation solution for efficient production.

Benefits
Compact, space-efficient design
Best machine performance with low life-cycle costs in 24/7 operation
Wide format range for high packaging diversity
Reliable case handling with innovative cascading case extraction
Safe case transport by means of 4 servo-controlled toothed belts with drivers
RFID format part detection available on request
Simple operation, quick format changeover and integrated format management
Straightforward reproducible format changeover in less than 10 minutes
PEWO-form UVP 2

more info
GEA High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors GEA PMA25
High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors GEA PMA25
24-1547
GEA
PMA25
n/a

Gross: volume 25 Lt.
Normal working volume: 15 Lt.
Average granulated batch weight: max. 10 Kg.
Impeller speed: 243/486 RPM.
Impeller motor capacities: 4/5.5 kW.
Granulator speeds: 1500/3000 RPM.
Granulator motor capacity: 1.3/1.8 kW.

more info
L.B. BOHLE High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors L.B. BOHLE BTM 150
High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors L.B. BOHLE BTM 150
24-1674
L.B. BOHLE
BTM 150
n/a

Hammer or turbo mills are suitable for research and development, as well as for batch production or continuous manufacturing. They are used for the milling of powders, agglomerates, and granules. Hammer mills are used in particular if the application demands a precise particle reduction for hard-to-mill active ingredients and other substances. In addition, hammer mills are used to re-mill fragmented tablets.
Tablets that have already been produced undergo inspection and may fail to meet the customer’s requirements for various reasons. If the tablet does not fulfil the specifications, the manufacturer can use the hammer mill to pulverize the tablets again and re-use the materials. The re-milling of the tablets and the recycling of the materials in production ultimately reduces the rejects rate and increases productivity.
Bohle Hammer Mill: Production up to 1,500kg/h
BTM (Bohle Turbo Mill) hammer mills can reach speeds between 600 rpm and 6000 rpm and produce up to 1,500 kg/h. In order to achieve this, the BTM is equipped with an automatic dispenser unit (rotary feeder).
This allows the operator to feed the material into the milling chamber evenly and without overloading. In addition, such automatic feeder devices can control the powder flow in the milling chamber. Further benefits: Less heat is generated, and the process can be repeated using the same parameters.
The internal rotor has two sides with different functions that support applications with wet or dry products. The knife side chops sticky products. The hammer side is used for crushing hard, crystalline products.
In the hammer mill, the particle size is defined by the sieve size selected for the mill. The BTM provides different sieve inserts that can be used to reduce the material size to as little as 0.1 mm.

Dimensions [LxWxH] 1370 x 900 x 1990 mm 1600 x 900 x 2300 mm Height of outlet 847 – 1706 mm 970 – 1960 mm Output ca. 1500 kg/h ca. 2500 kg/h Particle size [µm] < 100 µm

more info
Manesty Tablet Presses/Tablet Dedusters Manesty MK2-I
Tablet Presses/Tablet Dedusters Manesty MK2-I
24-1551
Manesty
MK2-I
2000

Used Manesty rotary tablet press, model MK2-I, type SRP, 39 station, D tooled, keyed upper punch guides, 10 ton pre compression, 10 ton main compression, single sided with force feeder and hopper, 1" max tablet diameter, 13/16" max depth of fill, rated up to 106,560 tablets/hour capacity

more info
FETTE Tablet Presses/Tablet Dedusters FETTE 2090 con WIP
Tablet Presses/Tablet Dedusters FETTE 2090 con WIP
24-1549
FETTE
2090 con WIP
2004

This modern high-speed compressor is suitable for the production of tablets up to a maximum of 16 mm Ø. The machine can process interchangeable contoerrette. The Fette 2090 can also produce capsule-shaped tablets.
The operating area of this tablet press is enclosed within four double-walled Perspex safety guards that allow easy access for cleaning or changing tools.
The drive motor and central lubrication system are located at the bottom of the machine and are accessible via large movable panels on all sides.
This machine can be connected to an external dust extraction system (not included) via connection ports located at the top of the machine housing.
The product to be filled is placed in a stainless steel hopper and guided through the motorized Fill-O-Matic powder feeder into the mold cavities. The powder feeder can be easily disassembled for cleaning.
Finished tablets are discharged through a chute, equipped with an electromechanical fin, which diverts tablets during startup, machine setup, and machine shutdown.
All operator controls are located on a separate dust-tight console.

Number of stations 36 max. Compression 100.0 kN Precompression: 100.0kN max. Tablet Ø: 16.0 mm max. Filling depth: 18.0 mm (with suitable cam) max. Tablet thickness: 8.5 mm max. Output: 216,600 tablets/hour (with turret installed) Turret diameter 410 mm Rotational speed 15 - 100 rpm Weight 3500 kg Dimensions 1200 x 1200 x 2022 mm

more info
Aeromatic-Fielder High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors Aeromatic-Fielder PP1
High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors Aeromatic-Fielder PP1
24-1546
Aeromatic-Fielder
PP1
1995

TK Aeromatic Fielder high-shear granulator, type PP1, Stainless Steel construction, with 10" diameter x 7" straight side bowl, rotor capable of speeds from 300-1500 rpm, chopper capable of speeds from 1000-3000 rpm, with controls, on casters

more info
Aeromatic-Fielder High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors Aeromatic-Fielder PMA 65
High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors Aeromatic-Fielder PMA 65
24-1548
Aeromatic-Fielder
PMA 65
1979

• High speed mixer granulator Aeromatic PMA 65
• Gross volume 65 Lt.
• Impeller speeds 127/254 rpm
• Impeller motor capacities 11 kW
• Granulator speeds 1500/3000 rpm
• Granulator motor capacity 7.55 kW

more info
ROMMELAG Bottelpack ROMMELAG 305 BFS
Bottelpack ROMMELAG 305 BFS
24-1702
ROMMELAG
305 BFS
1991

Rommelag compact filling machine for sterile pharmaceutical product into unit dose 500 ml oval shape plastic bottle

Machine type: shuttle Dimensions: approx. Length 3150mm x Width 2825mm x Height 2800mm Weight: 7000 kgs Machine Output: 1800 bottle/hr. Cycle duration: 16 sec No. of moulds: 2 moulds/4 cavities each Bottle size: 500 ml Used Plastic: LDPE 3020 D Empty Bottle Weight: 27-28 gm

more info
IMA Comadis Tube Filler Machines/Suppositories fillers IMA Comadis CD180
Tube Filler Machines/Suppositories fillers IMA Comadis CD180
24-1545
IMA Comadis
CD180
2008

The Comadis CD180 by IMA is an automatic tube filler with dual nozzles with a hot air station with seal jaws and trim station designed for demanding production environments. It features a robust mechanical structure and offers both basic and tailored configurations, including fully automatic tube feeders. The machine is capable of handling up to 180 tubes per minute, with filling volumes ranging from 2 to 250 ml (extendable up to 350 ml on request) , Diameter from 10 - 50 mm and tube height 60 - 250 mm . The servo-driven dosing pump allows convenient setup via HMI, providing precise control over stroke, acceleration, and deceleration for each dosing piston. Additionally, the system offers quick interchangeability of closing heads and simplified size part changes without tools, ensuring minimal downtime. Compatible with sustainable plastic materials, it’s suitable for various production needs while ensuring consistent quality and efficiency.

more info
Norden GmbH  Aseptic Filling and Closing Machines Norden GmbH  BIOFILL 3000
Aseptic Filling and Closing Machines Norden GmbH BIOFILL 3000
24-1708
Norden GmbH
BIOFILL 3000
n/a

Fully automatic syringes (injectors/sterile area) - filling and closing system NORDEN BIOFILL 3000,
70 syringes/min, speed adjustable,
VA version, for plastic injectors 7/10/20ml, accuracy +/-0.5%, volumetric filling pump ,
Filling: liquid/viscose/ointment,
Composed of:
control panel, control cabinet, syringe feed station, filling station & closing station, dosing pumps, sorting drum, test stations, storage tanks, conveyor belts, elevator,

working height 900 mm +/- 50mm,
380V, 50Hz, 3Ph,
air supply 5b,

more info

CONTACTS

INTIMAC s.r.l.

Via XXV Aprile, 8

21054 Fagnano Olona (VA)

Italia

Tel. +39 0331 1693557

email: inti@intisrl.it

TRADEMARKS