IMA Swiftpack tablet/capsule automatic counting/filling line
Machine suitable for printing flexible materials, bought blank and personalized only when needed and in the required quantity. It is user friendly and inexpensive in inks and clichés. Extremely compact and designed to run without the continuous presence of any operator.
Dedicated for the pharmaceutical and nutraceutical environments.
Output - up to 30 m/min Printing colors Ink used -solvent - water - UV dimension (LxWxH) 855x915X950 mm maximum reel diameter 250 mm maximum reel width 280 mm
The Seidenader Type XS-2 from 2012 is an economical and user friendly machine for the inspection of particles in liquids, specially designed for small to midsize production applications. Both, moving and non-moving particles are detected with extremely high reliability.
The Seidenader XS uses light extinction or light scattering methods, depending on pro- duct and container type.
Advantages:
· No moving inspection components like
mirrors, lights, cables or cameras
· New generation of digital cameras with
8 mega pixel chip for high resolution
images
· Continuous motion
· Wide product range up to ø51.6mm/100ml
· Double module design for higher speeds or future upgrade
· Full IQ/OQ support package
· Integrated control cabinet and operator
interface
· Minimal false reject rate
Fields of application:
· Vials and ampules
· 1ml-100ml
· Clear liquids and suspensions
Standard inspection criteria:
· Moving particles, glass chips and fibres
· Non-moving particles in the bottom of the container
· Underfill
Formats 20R/15ml
50H/30ml
100H/100ml
20R/15ml
50H/30ml
100H/100ml
2 climate chambers producer ThermoTec model TCS 1001 from 2009 / 2020
Equipment:
1. electronic temperature and humidity sensor
2. digital PID controller with setpoint/actual value display
3. adjustable overtemperature protection
4. air-cooled chiller unit
5. 3 height-adjustable shelves
6. lockable doors
7. automatic water filling with demineralised water
Temperature range °C 0 to +60
Temperature stability K <- -/+ 2
Humidity range % 20 to 95
Humidity consistency % -< +/- 5
Useful chamber volume L approx 1060
Storage area per shelf m3 0.33
Max. Max. number of shelves 24
Height grid dimension mm 30
Weight kg 200
Electrical connection 230 V/1 Ph/50 Hz
Outside (WxDxH): 1460 x 1025 x 2105mm
Interior (WxDxH): 1220 x 585 x 1500mm
We have 4 climate chambers from 2005 and 2009 for the storage of stability samples
In general, the system is designed for the following temperature and humidity ranges:
25°C +/-2°C, 60%RH+/-5% RH
30°C +/-2°C, 65%RH+/-5% RH
40°C +/-2°C, 75%RH +/-5%RH
Two climate chambers are each supplied by an electrical control cabinet and have separate circuit diagrams.
The climate chambers are based on Viessmann coldrooms
All climate chambers have identical dimensions and are equipped with stainless steel shelves.
The qualification documents can be provided on request.
The delivery and installation of the system as well as the technical service was exclusively realised by ThermoTEC.
Dimensions of the climate chambers (KK):
Outside (WxDxH): 2100 x 3000 x 2310mm
Door dimensions (WxH): 800 x 2000mm
Interior (WxDxH): 1940 x 2840 x 2140mm
Horizontal packing machine IMPACK
Model 130
Year 2014
Speed 40-80 pcs/min
Power 380 V
50 Hz
Input 6 Kw
Machine dimensions:
Weight 2000 Kg
Size L 3250 mm / W 1050 mm / H 1700
Moulding machine D.F.
Type MRT500
Year 2004
V380 - 50 Hz
Weight Kg 420
Bohle Granulator Type PFG1000 + PFZ600EX
Year of construction 1991/1993
Voltage380 V
Frequency 50Hz / 10A
Weight 75 kg
Semi-automatic machine with intermittent movements and vertical
transport of the carton. Cartoner suitable for cartons with closure by inserting 2 or alternating flaps, the product is inserted manually, the machine inserts the leaflet, codes the carton, closes the carton and ejects the product at the exit.
The frame contains all the mechanical controls.
The Cam AV cartoner was designed with the need for frequent format changeovers in mind. The operations required to process a product and/or another carton have been minimised, allowing very fast format changeovers.
Technical data :
- Mechanical speed per minute 15 / 70 units
- Motors 1 Kw
- Power consumption 1.5 Kw
- Air consumption 16.9 NI/1
- Air pressure 5/6 bar
- Size range min A 20 B 15 C 50 / max A 115 B 70 C 190
OHara LabCoat Coating Pan, model LC1 from 1999
Capacity 510 m2
Power 380V, 50Hz
Amperage 2.4
RPM/Speed 3000
AFV 2010
FILLING AND CLOSING MACHINES FOR AMPOULES AND VIALS
The machines of this series are fully automatic filling and closing ma- chines for both ampoules and vials. They are rotary machines processing 1 or 2 containers at each machine cycle and reaching an output of up to 3000 resp. 6000 containers per hour.
Multifunctional applications
Thanks to their compact design and small footprint, these machines can be used both in laboratories and in medium-scale production situations.
Format changeover is quick and easy, so these versatile machines can be used for different types of containers and products.
The layout of the workstations and the design above the work surface promote laminar airflow. Virtually all parts are made from corrosion-resistant materials such as stainless steel and high-quality plastics.
The machine is easy to clean and maintain.
Clearly arranged, versatile work area
- Loading containers from trays or automatic transfer from sterilizing tunnel upstream
- Intermittent transfer to the star wheel
- Container registration by photo- electric sensors to control follow- ing work steps (no container - no dosing - no stopper)
- Opening ampoules (if closed ampoules are processed)
-Nitrogen flushing before filling
- Precise dosing with valveless rotary piston pumps
-Nitrogen flushing after filling
- For ampoules:
Nitrogen blanket during sealing Sealing by melting the stem and pulling off the ampoule tip - For vials:
Closing by inserting rubber stoppers
- Discharge into trays or transfer to a machine linked downstream
Valveless rotary piston pump(s) - self-priming and precise
The dosing station is equipped with either one or two valveless rotary piston pumps. These high-quality, precision pumps comprising only two parts guarantee utmost dosing accuracy. These pumps are simple to remove, install, clean and sterilize as are all the parts in contact with the product.
Depending on the product to be filled, either stainless steel or ceramic pumps can be supplied.
Dose adjustments within the pump volume can be made by increasing or reducing the pump stroke.
Both the central dose adjustment and the fine adjustment for each pump are made mechanically with setting spindles. They are equipped with digital position displays ena- bling the dosing quantities to be repeated, so that they can be repro- duced with the same accuracy at any time.
Tried and tested
The ampoules are sealed by fusing the glass and pulling off the tips of the ampoule stems.
The fuel gas and oxygen mixture produces a constant burner flame. The gas supply can be set indivi- dually on the respective flow meter for each work station.
If the flame goes out, the gas supply is shut off automatically.
The ampoule stems are heated in two steps and then as the glass is fused to a dome the tip is pulled off and discarded into a bin. The heat generated by the sealing process is drawn out of the work area by an extraction system.
The closures are fed to the closing station by a sorting bowl and a track vibrator.
Technical details : Output 6000/h Ampoule Sixe Range : max 23mm Ø / Max 180 mm Vial size Range : max 30 mm Ø / Max 110 mm Dosing range : 0.15 – 28 ml Electrical supply 230/400 v – 50 hz – 1.5 kw
The IMA Libra SENSITIVE 350 is a linear labelling machine suitable for applying self-adhesive wrap-around labels to cylindrical glass, metal and plastic containers.
The machine is equipped with one side labelling head which applies the label with high accuracy. This precision is also given by an appropriate spacing between the containers and an easy-to-regulate application group.
The labelling unit is installed in the machine basement for direct access to the labelling reels.
The supervision and monitoring of the overall process is done by a PLC with a user-friendly HMI.
SENSITIVE 350 Highlights
1.Compact and ergonomic design with stainless steel finish.
2.Can be supplied in stand-alone version or integrated in complete processing and packaging lines.
3.Stepping motor to drive the label dispensing and application group.
4.Rejection unit for containers with missing labels and/or incorrectly printed data.
5.Safety system for fallen bottles with machine stop and alarm on the control panel.
6.Straightforward access over the entire labelling process, quick clearance and cleaning.
The SENSITIVE 350 is conceived for easy integration of overprinting devices such as hot-foil, thermal transfer, laser and inkjet. A wide range of overprinting control systems can also be installed: single character overprint control by videocamera (OCV/OCR), bar code or Data Matrix control, etc.
Maximum output (pieces/minute) 350
Installed power (kW) 2
Standard voltage 400 V – 50 Hz
Bottle maximum height (mm) 220
Bottle diameter (mm) 16-78
Label height (mm) 10-100
Label length (mm) 15-250
Label reel diameter (mm) 400
Label accuracy (mm) ±1
Ima Mini cartoner from 1997
Horizontal cartoner for pharmaceutical or cosmetic use with pre-folded leaflet.
TECHNICAL DATA MINILINE
Output up to 50 bottles/min. or 6,000 tablets/min.*
Container diameter range 25 mm to 100 mm
Container height range 40 mm - 200 mm
Cap diameter range 20 mm - 60 mm
1.2 and 3 gram dryer - 1 - 10 containers per bottle
Cotton, Rayon and Polyester Length 50 mm - 100 mm
this additional information is standard for this model. Please always double-check the details during a visit
The Marchesini Ba150 Cartoner is a horizontal machine with alternating movement
The packaging cycle is completely automatic. A sensor detects the presence of the product
in the drawer and commands the withdrawal of the case and any leaflet, activating the correct withdrawal controls.
The opening of the case takes place with the traditional mechanical blade system which guarantees correct functioning with the widest type of cases and cardboard quality.
The format change requires simple and rapid operations guided by millimeter scales.
Mechanical speed ca 150 strokes/ min
Automatic tube feeding
Leaflet folder GUK
Automatic Vial or Ampoule Leak Detection Machine Bosch KLD1042 from 2002
Diameter of ampoules min./maxi.: 10 - 32 mm
Available formats parts: 1, 2, 5 and 10 ml
Speed : 24,000 ampoules/ hour up to Ø 13 mm (ampoule of 3ml and 18,000 ampoules/ hour up to Ø 18 mm (ampoule of 5ml or vial of 4R)
Via XXV Aprile, 8
21054 Fagnano Olona (VA)
Italia
Tel. +39 0331 1693557
email: inti@intisrl.it