dosing device

We carry out the complete revamping of the machines

Download of all our available used machinery

dosing device [756]

IMA Overwrapping Machine IMA BFB DIVISION 3711
Overwrapping Machine IMA BFB DIVISION 3711
23-1223
IMA
BFB DIVISION 3711
2016

High quality individual or multiple over wrapping for regular product.
Complete with a device to lift the film-driving rollers during product elevation, these machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish.

Designed to facilitate cleaning procedures, the equipment uses standard Siemens electrical componentry and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath.

Production for the 3711 reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, so as to avoid unwanted downtime.

TECHNICAL SPECIFICATIONS Electrical frequency Hz 50 Operating voltage Volt 380 Air pressure bar 6 Length approx. mm 6400 Width approx. mm 1735 Height approx. mm 1800 Net weight Kg 1500

more info
IMA Overwrappers/Shrinkwrappers/Banders IMA BFB DIVISION WA30
Overwrappers/Shrinkwrappers/Banders IMA BFB DIVISION WA30
23-1224
IMA
BFB DIVISION WA30
n/a

more info
IMA BFB Cartoning Machines/Case packers IMA BFB CP18
Cartoning Machines/Case packers IMA BFB CP18
23-1225
IMA BFB
CP18
2013

IMA BFB automatic case packer of 2012 made in a way to ensure maximum reliability, great versatility, minimum footprint, with really small dimensions and high production characteristics. A newly designed machine particularly suitable for inserting single shrink-wrapped cartons or pre-glued trays of standardized dimensions..
SECTOR OF USE
Pharmaceutical, chemical, cosmetic, food, dietary, medical devices.
PECULIARITIES:
Electrical system, noise level and accident prevention protections, to European standards. Carton closure with adhesive tape and/or hot melt or vinyl glue application.
Picking and forced suction cup opening arms ensure perfect squaring of the carton in the filling phase. The product is stacked and introduced into the open carton.
The machine proceeds to close the carton flaps and depending on the configuration to close the carton.

TECHNICAL SPECIFICATIONS Electrical frequency Hz 50 Operating voltage Volt 380 Air pressure bar 6 Length approx. mm 6400 Width approx. mm 1735 Height approx. mm 1800 Net weight Kg 1500

more info
TGM Cartoning Machines/Case packers TGM Box 90
Cartoning Machines/Case packers TGM Box 90
23-1226
TGM
Box 90
2010

machine currently in use, equipped with a pick-and-place for aluminium cream tubes that positions them for cartoning.
Technical specifications:
Dimensions of BOX 90 machine
Width 2781 mm
Depth 1427 mm
Height 1970 mm
Box dimensions
Width 20 - 100 mm
Height 15 - 100 mm
Depth 60 - 120
Minimum machine speed 1000 pcs/h
Max. 5000 pcs/h
Machine weight 1000 kg

more info
Brevetti Cea Inspection Machines for Ampoules and Vials Brevetti Cea A50/300
Inspection Machines for Ampoules and Vials Brevetti Cea A50/300
24-1229
Brevetti Cea
A50/300
2009

Inspection machine of the brand Brevetti CEA model A50/300 BJ2009 with spareparts.
The machine data are as follows:

Formats: 1&2ml 10,75Ø Maximum speed 18000 ampoules in 1h.
5ml 14,75 Ø Maximum speed 18000 ampoules in 1h.

Control stations: St. 0 bubble heads/cosmetics
St. 1 particles
St. 2 Particles and fill level
St. 3 Black burner
St. 4 Particles

Outlet channels: 2 good outlets
2 bad outlets

Documentation: Operating instructions
Spare parts catalogue

Weight:2050 kg

more info
IMA Coating Equipment IMA GS HE 400
Coating Equipment IMA GS HE 400
23-1191
IMA
GS HE 400
2012

The Solid wall pan, with no perforations, makes it possible to process all sizes and
shapes of product without clogging.
The shape, combined with the surface smoothness, bring a perfect mixing of the cores
and a uniform distribution of the coating material.
An exclusive, patented drying system.
Two paddles immersed in the core bed guarantee that the drying air is conveyed directly
through the tablet mass, thus avoiding swirls and turbulence inside the pan.
Either blowing or exhausting paddles can be used, depending on the process
requirements.
e use of different sizes of paddles guarantees high flexibility in terms of pan working
capacity.
Spray guns: Both Sugar and Film spray guns can be easily fitted on the sliding support arm, which can be rapidly removed from the front door of the pan, allowing their calibration/ adjustment and fast, safe cleaning and sanitizing operations. The high technology HT system is the ideal solution for the film and sugar coating of tablets and microtablets. The exhausting paddles, immersed in the core bed, guarantee the optimum ventilation results that are required during aqueous film coating, as well as maximum versatility to obtain the best results in the sugar-coating processes.
Technical details
• Minimum/maximum working capacity (litres) 200÷400
• Pan Diameter 1630 mm
• Pan mouth diameter (mm) 520
• Pan motor power 4 kW
• Process air delivery (m3/h) 2500
• Power consumption 25 kW

more info
IMA Coating Equipment IMA GS HE 400
Coating Equipment IMA GS HE 400
23-1192
IMA
GS HE 400
2007

The Solid wall pan, with no perforations, makes it possible to process all sizes and shapes of product without clogging.
The shape, combined with the surface smoothness, bring a perfect mixing of the cores and a uniform distribution of the coating material.
An exclusive, patented drying system.
Two paddles immersed in the core bed guarantee that the drying air is conveyed directly
through the tablet mass, thus avoiding swirls and turbulence inside the pan.
Either blowing or exhausting paddles can be used, depending on the process
requirements.
e use of different sizes of paddles guarantees high flexibility in terms of pan working
capacity.
Spray guns: Both Sugar and Film spray guns can be easily fitted on the sliding support arm, which can be rapidly removed from the front door of the pan, allowing their calibration/ adjustment and fast, safe cleaning and sanitizing operations. The high technology HT system is the ideal solution for the film and sugar coating of tablets and microtablets. The exhausting paddles, immersed in the core bed, guarantee the optimum ventilation results that are required during aqueous film coating, as well as maximum versatility to obtain the best results in the sugar-coating processes.
Technical details
• Minimum/maximum working capacity (litres) 200÷400
• Pan Diameter 1630 mm
• Pan mouth diameter (mm) 520
• Pan motor power 4 kW
• Process air delivery (m3/h) 2500
• Power consumption 25 kW

more info
KILIAN Tablet Presses/Tablet Dedusters KILIAN RI 3
Tablet Presses/Tablet Dedusters KILIAN RI 3
21-1243
KILIAN
RI 3
n/a

This tablet press is suitable for the production of tablets up to a maximum diameter of 20 mm at speeds of up to 50,000 tablets per hour mechanical speed depending on the product .
The 20-station turret accepts Kilian tools.
The operating area is enclosed within three guards for noise reduction and to allow access to the drum table.
The main motor, gear train and lubrication system are located in the lower part of the machine cabinet and are accessible via large removable panels on all sides.
The machine can be connected to a dust/vacuum extraction system (not included) via connection connections at the rear to ensure largely dust-free operation. The product to be compressed is fed into a stainless steel powder hopper and is guided via the motorised powder feeder type Fill-O-Matic into the mould dies.
The powder feeder can be easily disassembled for cleaning. The finished tablets are discharged sideways down a chute.

more info
L.B. BOHLE High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors BOHLE BTS 200
High Shear Mixers/Powder Mixers/Mills/Granulators/Roller Compactors BOHLE BTS 200
23-973
L.B. BOHLE
BTS 200
n/a

Bohle Turbo Screen 200 Fast particle size reduction for high capacities The Bohle High Speed Cone Mill is a patented unit used for particle sizing of dry or wet products, ensuring the best sieving results. The benefits of the Bohle Turbo Sieve 200: Innovative impeller design Speed 150 – 1500rpm Particle size of dry or wet products Mobile, height adjustable, flexible Production capacities of 1 – 2 tons/hour Perforated conical meshes of different meshes (one is included with the equipment) This fast running conical screen features excellent throughput and product size distribution for wet and dry materials. By incorporating a new impeller design, the Bohle Turbo Sieve (BTS) 200 substantially reduces production time. When used with low density materials, the screen increases throughput by over 50% compared to straight bar design mills. The unit production capacity is 1 to 2 tons/hour.
Patented impeller design The BTS 200 features a vertical tapered screen arrangement with a patented impeller design. By accepting a variety of interchangeable screens with different hole patterns and shapes, the mill addresses a variety of process applications. Two flat and curved impeller wings generate much higher performance than standard impeller designs. (Straight and standard impeller designs are also available to fit various screen sizes.) A shaft drive system drives the impeller to increase performance at high speeds. The mill design allows for gravity feed so that the product passes quickly through the conical screens with reduced tension. This versatile cone sieve is supplied on a mobile riser for easy height adjustments and optimal positioning. Designed to GNP standards, the units are easily disassembled for maintenance and cleaning in less than a minute without tools. The milling modules can be sterilized at 130 degrees C without disassembly. Systems are available for completely dust-free application, resulting in minimal product exposure for operators and cleaner production environments.

more info
Kosan Tablet Presses/Tablet Dedusters Kosan Luminer II
Tablet Presses/Tablet Dedusters Kosan Luminer II
23-974
Kosan
Luminer II
n/a

This used / secondhand capsual and/or tablet polisher is stainless steel construction.
Pharmaceuticals stainless steel capsule and tablet polisher. New polishing brush and brushes throughout. In as-new condition. 3 phase 10 amp. Variable speed controller.
Make: Kosan

Model No: Luminer II

Length: 1200

Width: 600

Height: 1500

Motor: 3ph

more info
RS Pack  Bagging machine RS Pack  VPE 180/SD25
Bagging machine RS Pack VPE 180/SD25
23-1248
RS Pack
VPE 180/SD25
2010

Intended use 1st automatic dosing, packaging and weight control of powders in tubular bags simultaneously printed and molded in composite film. Possible filling quantities are 40g-100g and 500g-1000g.

Power supply/compressed air: Power supply: 400V, max. 20A Compressed air: 6bar, max. 500l/min. Package sizes: Flat pouches with a film width of 180 mm (corresponding to about 8 cm width) for 40g-100g filling. Stand-up pouches with a basic format of 130x75 mm (corresponding to a film width of 435 mm) for a filling of 500g-1000g For both formats, the longitudinal and transverse seams must be welded for a width of 5 mm to create a completely airtight pouch. Output speed: Format a: 40g-100g: >=20 bags/min. Format b: 500g-1000g: >10 bags/min. Packaging material: PET/ALU/PE roll composite film (17g/17g/70g per m2). PET/ALU/PET/PE roll composite film (17g/17g/17g/70g per m2)

more info
Bonfiglioli Engineering Dissolver Bonfiglioli Engineering MVF110P
Dissolver Bonfiglioli Engineering MVF110P
24-1252
Bonfiglioli Engineering
MVF110P
1996

more info
FEDEGARI Washing Machines for Ampoules and Vials/Blowing Table for Bottles FEDEGARI XFSW7
Washing Machines for Ampoules and Vials/Blowing Table for Bottles FEDEGARI XFSW7
24-1254
FEDEGARI
XFSW7
2016

FEDEGARI XFSW7 (2016)
ECO STEAM WASHER
NEVER USED
complete with trolleys, controls and documentation.
Fedegari high-performance CMP Steam Washers capitalize on the experience acquired with the FOWS-series of washer-sterilizers in the pharmaceutical market. These machines represent a cost-effective solution for the highest performances. Fedegari steam washers, in fact, use steam (through a generator or utility line) to optimize performances reducing operating costs.
The FSW state-of-the art modular customizable
rack can be easily adapted to every specific load configurations.
Extreme Washing Performances
A close loop piping recirculates water without the need of a buffer tank. Steam injection during pre-washing softens most of the soil thus reducing the detergents typically needed, as well as utilities and energy in general
As every other process equipment manufactured by Fedegari, the FSW-Washers run on Thema4 process controller.
A conductivity meter controls the process to terminate the washing/rinsing Phase when the desired setpoint is reached.
A0,22 um Hydrophobic sterile filter cartridge together with a HEPA filter (H14) allow sterile air injection for improved drying. All these unique and original eco-friendly solutions make the FSW-Washers the most cost-effective machines in this category.

more info
Sconosciuto Miscellaneous Sconosciuto Rotating Table
Miscellaneous Sconosciuto Rotating Table
24-1253
Sconosciuto
Rotating Table
n/a

more info
Cam Cartoning Machines/Case packers Cam PF32
Cartoning Machines/Case packers Cam PF32
23-1234
Cam
PF32
n/a

more info

CONTACTS

INTIMAC s.r.l.

Via XXV Aprile, 8

21054 Fagnano Olona (VA)

Italia

Tel. +39 0331 1693557

email: inti@intisrl.it

TRADEMARKS