+39 0331 1693557
inti@intisrl.it
Download of all our available used machinery
PRB Newpocket of 2019 is an electronic horizontal case packer with a wide choice in the type of product to be processed: cartons, boxes or trays. This machine is also available in a barchetta version, equipped with a system to handle trays from unfolded blanks.
Technical Information
Fully electronic machine, main movements driven by brushless motors
Axial movements on case-hardened shafts by means of sealed bearings
Vacuum pump with dry running
Noise level below 75 db
Weight standard version approx. 1,450 kg
Air consumption 100 lt./min. at 6 atm.
Power consumption: 12Kw. (with glue closure) - 7Kw.(with belt closure)
Mechanical speed: 14 cycles/min (with carton closing system using self-adhesive tape)
Mechanical speed: 20 cycles/min (with carton closing system using glue)
Standard electrical components: Elau/ Schneider
Standard voltage: 400V 3Phase 50Hz.+ T+ N
The die-cuts are taken from the magazine by means of suction cups, then removed from the mould during transfer and placed in the corresponding drawer. In sequence, the side (bottom) flaps are unrolled and closed, then, after gluing, the remaining (bottom) flaps are glued together. The product is fed into the carton via a feeding system that varies according to the type of product in the carton. The feeding system positions the product in the carton; the upper flaps of the carton are opened to facilitate insertion and a pusher pushes the product completely into the carton. The carton is closed by successively folding the side flaps and then the closing flap in two steps, i.e. first folding and then inserting the flap and closing the carton. the carton. The closed carton is then evacuated by means of a pusher.
The AV 30 case packer is designed for packing typically difficult products:
- Machine with alternating mechanical movements, equipped with electropneumatic controls.
- Reduced footprint.
- Total separation of the work table from the mechanical parts.
- Only one operator is required to feed the product.
- Minimum maintenance
- Automatic coupling to our display case packers.
MACHINE TECHNICAL DATA
Supply voltage: 220/380V. - 50 Hz
Installed power: 2 KW
Air consumption: 175 NL/cycle
Weight: Kg 600
Maximum mechanical speed: 55 strokes per minute
Productivity: 10,000/20,000 in eight hours, depending on product type.
Changeover time: Max. 15 minutes
Case characteristics :
A min 50 max 140
B min 15 max 70
C min 70 max 300
Automatic Horizontal Case Packer, machine for the final packaging in cardboard, made in a way to ensure reliability, versatility and space saving. A really small size equipment with high production features.
This is an automatic unit able to perform automatically and in a continuous cycle the grouping of products, their introduction into shipping cartons previously taken from stock, formed and positioned in such a way as to enable the mobile hopper and the pusher to carry out the filling, which completed the two groups of transport side, which serve to maintain the correct squaring, convey the same to the exit by passing it through the operating groups which carry out the closure on both sides by the applying hot melt glue. The entire machine is equipped with safety sensors and plexi-glass safety doors. This unit can be easily changed over for different types of products including boxes, bottles, tubs and containers, and different size boxes. Closing of cases by glue on both sides with Nordson glue system. Electrical panel with PLC. Level control of boxes in stock, maximum load in power control, counters (packagings, working hours, etc.).
TECHNICAL DATA
Length mm 2500
Width mm 1700
Height mm 1200
Net weight Kg 1800
Power absorbed Kw 3,18
Electric Frequency Hz 50
Voltage Volt 380
Pressure bar 6
PRODUCTION CHARACTERISTICS
Production 30 cycles/min
Case formats min-max (Length x Width x Height)
mm 150x105x130
mm 450x350x290
Marchesini PRB Palletiser ( PRB )
Model Ministratus
Max. speed 10 cycles per minute
Format range
A 150 - 600 mm
B 100 - 400 mm
C 80 - 610 mm
Pallet height Standard size 1665
Pallet size 800 x 1200 / 1000 x 1200
Electrical details 380-220V 50Hz
Installed power 6 kW
Compressed air 6 bar
Air consumption 0.7 NL/ per cycle
Marchesini PRB Palettierer ( PRB )
Modell Ministratus
Max. Geschwindigkeit 10 Takte pro Minute
Formatbereich
A 150 - 600 mm
B 100 - 400 mm
C 80 - 610 mm
Palettenhöhe Standardgröße 1665
Palettengröße 800 x 1200 / 1000 x 1200
Elektrische Daten 380-220V 50Hz
Installierte Leistung 6 kW
Druckluft 6 bar
Luftverbrauch 0,7 NL/ pro Zyklus
Sizes :
Cardboard box :
Length: 250 mm - 450 mm
Width: 150 mm - 300 mm
Height: 170 mm - 325 mm
Length + Width: 400 mm - 750 mm
Flap: 75 mm - 150 mm
Product boxes :
Length ( stacker width direction ) 80 mm - 130 mm
Thickness (stacker height direction) 20 mm - 60 mm
Width (stacker lengthwise) according to case length
CARTONER CAM MODEL HV2 FOR AMPOULES :
Model HV2 Year 2002
GUK leaflet folder
Laetus Argus 4 bar code reader
Material of machinable cases: Compact carton with a weight of 220 +/- 400 gr / m2.
Cords and preattached cases.
Closure: With hot melt Automatic ampoules trays feeder .
Electrical Trifase altering 220 or 380 V 50Hz Motor power 3 Kw Motor power bovine pump 1.25 Kw Power transformer and service circuits 0.95 Kw Total power 5.20 Kw Air consumption Absorbed 17NL per minute at a pressure of 6 bar
Complete line comprising :
- FARCON FC320 VIAL BLISTER MACHINE WITH SEA VISION SYSTEM
VISION AND DIFFERENT FORMATS
- CAM CARTONER MODEL HV2 FOR AMPOULES
- IN-LINE WEIGHER
- MARCHESINI BOX MARKING MACHINE MODEL MS734 FROM 2008
- MARCHESINI PRB PACKING MACHINE FAR 2001 FROM 2004
- PRB CASE PACKER MARCHESINI MODEL SP FROM 2004
- PRB MARCHESINI MINISTRATUS PALLETISER YEAR 2009
KLOCKNER P4/200 CARTONING MACHINE WITH AUTOMATIC BLISTER FEEDER IN LINE WITH BLISTER MACHINE
Manufacture : Klockner Model : P4/200 Carton range : width 30 x 115 mm - height 12 x 90 mm lenght 60 x 150 mm Mechanical speed : 200 cartons per minute Dimension of the machine : 5180 x 1500 x 1640 mm Weight : 3.300 Kg. Year of manufacturing 1996
General data of the equipment:
High performance cartoner with continuous movement for bottles . The formats are fully registrable. With simple operations and with the substitution of some parts, it is possible to use cases with even or alternate fins, with measures included in the following limits:
Width: 20 - 70 mm
Height: 12 - 70 mm
Length: 55 - 200 mm
The maintenance of the equipment is very simple and above all easy to use.
The cams are of the channel type machined from a single block, the mechanical shafts are installed on ball bearings.
Machine weight: 2200 Kg.
Equipment measurements: 3680 x 1660 x 1570 mm
Cartoning speed:
Cartoner HF 77 from 50 to 250 cases per minute.
Security:
The cartoner comes with electrical and mechanical safety devices, which intervene in the event of malfunctions, interrupting the regular work cycle, thus eliminating the risk of breakage or damage.
BA 100 series cartoning machines are horizontal reciprocating motion machines.
The cartoning cycle is fully automatic . A sensor detects the presence of the product
in the drawer and commands the picking of the carton and any prospectus, activating the correct picking controls.
Carton opening is done with the traditional mechanical blade system that ensures proper operation with the widest type of cartons and carton quality.
Size changeover requires simple and quick operations guided by millimeter scales.
Mechanical speed 100 strokes/min. Size ranges A20-110 mm B12-55 mm H55-170 mm Automatic tube feeding GUK leaflet bending machine
IMA BFB automatic case packer of 2012 made in a way to ensure maximum reliability, great versatility, minimum footprint, with really small dimensions and high production characteristics. A newly designed machine particularly suitable for inserting single shrink-wrapped cartons or pre-glued trays of standardized dimensions..
SECTOR OF USE
Pharmaceutical, chemical, cosmetic, food, dietary, medical devices.
PECULIARITIES:
Electrical system, noise level and accident prevention protections, to European standards. Carton closure with adhesive tape and/or hot melt or vinyl glue application.
Picking and forced suction cup opening arms ensure perfect squaring of the carton in the filling phase. The product is stacked and introduced into the open carton.
The machine proceeds to close the carton flaps and depending on the configuration to close the carton.
TECHNICAL SPECIFICATIONS Electrical frequency Hz 50 Operating voltage Volt 380 Air pressure bar 6 Length approx. mm 6400 Width approx. mm 1735 Height approx. mm 1800 Net weight Kg 1500
machine currently in use, equipped with a pick-and-place for aluminium cream tubes that positions them for cartoning.
Technical specifications:
Dimensions of BOX 90 machine
Width 2781 mm
Depth 1427 mm
Height 1970 mm
Box dimensions
Width 20 - 100 mm
Height 15 - 100 mm
Depth 60 - 120
Minimum machine speed 1000 pcs/h
Max. 5000 pcs/h
Machine weight 1000 kg
CP18: extremely compact case packer with palletizing option. Ideal for packaging products such as pharmaceutical items, the machine is suitable for different production needs. Equipped with a horizontal case magazine for easy loading, the machine keeps the case erect during product insertion with the aid of suction cups fitted to the pick-up and forced opening arms. All the parts of the machine can be reached from the operator’s side without having to walk to the opposite side to reach the carton stacking unit. The machine can be fitted with the following optional groups and features: case overturning, product tracking and camera detection devices, integrated labellers and markers, and can also be fully servo-driven.
1.
Horizontal case magazine for easy loading.
2.
All case flaps are positively closed and verified.
3.
Case fully closed before transportation and taping.
4.
Movable hopper to follow the cartons collation up into the case.
5.
Suitable for Track & Trace purposes.
6.
Further optional groups like liftable pusher to give total visibility of carton layer, labelling module, rejection system.
7.
Possibility to be integrated with all Flex Palletizers.
Case dimensions
A B C
Min. 220 120 120
Max. 600 400 350
Casepacker output 8 cases/min.
Palletizer output up to 10 cycles/min.
Via XXV Aprile, 8
21054 Fagnano Olona (VA)
Italia
Tel. +39 0331 1693557
email: inti@intisrl.it
